Material Insights · Understanding the Material World

Milling machine

A rotating multi-toothed cutter shapes flat and complex metal surfaces.

Making things · Tools and machining · No. 328

  • First industrial revolution
  • Readiness 9 of 9
  • System
Making things · Technology

By about 1818 an American armoury was milling metal; computer-run machining centres made 37.7% of Japan's machine tool output in 2024.

Chart: Illustration: Milling machine

Where it comes from

Chart: Map of where it comes from

Milling grew from the need to make gun parts alike. A milling machine was at work in a Middletown, Connecticut, armoury by about 1818, and at Harpers Ferry John Hall built machines with guides and stops so that boys could make interchangeable parts.

Three things to know
  1. John Hall's straight-cutting machine, used at Harpers Ferry for rifle parts from the 1820s, was a forerunner of today's milling machine.
  2. By 1839 the British firm Nasmyth, Gaskell and Co had sold over 50 milling machines.
  3. The first universal milling machine, developed by Frederick Howe with Joseph Brown, was sold on 14 March 1862.
The journey
  1. 1 WorkA block of steel or aluminium is clamped to the table
  2. 2 CutterA hardened tool with many teeth turns on the spindle
  3. 3 FeedThe table moves the work slowly into the turning cutter
  4. 4 ChipsEach tooth in turn shaves off a small chip of metal
  5. 5 ShapeFlat faces, slots, pockets and gear teeth appear
  6. 6 CheckThe part is measured against gauges or drawings
Go deeper pick a tab to open it in full