Material Insights · Understanding the Material World

Milling machine: Materials

Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is

Processes
  • St Steel criticality low Steel is the most common metal milled, and machine frames and spindles are made of cast iron and steel.
  • Al Aluminium criticality low Aluminium aircraft and car parts are milled in large volumes.
  • Ti Titanium criticality low Titanium aircraft parts are milled from solid billets.
Needs
  • W Tungsten criticality high Most milling cutters and inserts are tungsten carbide; about 60% of the tungsten used in the United States goes into cemented carbide parts [7].
  • Co Cobalt criticality high Cobalt binds the carbide grains in cutters; 9% of United States cobalt use is in cemented carbides [8].

as of 2026-11-10. No source gives material per machine; criticality is the writer's judgement from the EU lists [9] and the concentration of mining [7, 8].

Critical materials

The materials whose supply could hold it back

  • Tungsten: on the EU critical and strategic raw materials lists [9]; China mined 67,000 of the world's 85,000 tonnes in 2025, about 79% (calculated) [7].
  • Cobalt: on the EU critical and strategic lists [9]; Congo (Kinshasa) mined 230,000 of 310,000 tonnes in 2025, about 74% (calculated) [8].

as of 2026-11-10

Sources

  1. Tungsten, Mineral Commodity Summaries 2026 U.S. Geological Survey, 2026
  2. Mineral Commodity Summaries 2026: Cobalt US Geological Survey, 2026
  3. RMIS - Critical and Strategic Materials European Commission, Joint Research Centre, Raw Materials Information System