Material Insights · Understanding the Material World

Oscilloscope

An electron beam traces voltage against time on a screen.

Sensing and measurement · Measurement · No. 482

  • Second industrial revolution
  • Readiness 9 of 9
  • Component
Sensing and measurement · Technology

The oscilloscope lets engineers see electricity: a dot of light, or now a stream of samples, drawing each voltage as it changes.

Chart: Illustration: Oscilloscope

Where it comes from

Chart: Map of where it comes from

Ferdinand Braun built a cathode ray tube in 1897 to study alternating current: a coil bent an electron beam so that it drew the waveform on a glowing screen. He shared the 1909 Nobel Prize in Physics.

Three things to know
  1. Braun's 1897 tube steered an electron beam with a coil, so the glowing spot traced the shape of a current on the screen.
  2. The Tektronix 511 of 1947 had a triggered sweep, which holds a repeating waveform still and catches single events; a Dumont model of 1945 already had one.
  3. Digital storage oscilloscopes sample the signal with an analogue-to-digital converter, and by the mid-1980s they had come to dominate.
The journey
  1. 1 SignalA probe picks up the voltage to be studied
  2. 2 TriggerA circuit starts each sweep at the same point in the signal
  3. 3 Beam or samplerAn electron beam is deflected, or a converter samples the voltage
  4. 4 DisplayVoltage is drawn upwards against time across the screen
  5. 5 AnalysisEngineers measure timing, shape and noise of the signal
Go deeper pick a tab to open it in full