Material Insights · Understanding the Material World

Oscilloscope: Overview

What it does

The job the technology does for people, in a short paragraph

An oscilloscope draws a voltage against time on a screen, so engineers can see the shape, timing and noise of an electrical signal. Ferdinand Braun's cathode ray tube did this in 1897 [1]. Triggered commercial scopes such as the Tektronix 511 went into production in 1947 [2], and digital storage oscilloscopes had come to dominate by the mid-1980s [4]. It is the basic bench tool of electronics design and repair.

as of 2026-11-11

How it works

The working principle in plain words, step by step

In the classic analogue scope, a heated cathode in a vacuum tube fires a narrow beam of electrons at a screen coated with a phosphor that glows where it is hit. The signal to be studied drives plates or coils that push the beam up and down, while a sweep circuit moves it steadily from left to right. The glowing trace is therefore voltage plotted against time [1]. A trigger circuit starts each sweep at the same point in a repeating signal, so the picture stands still [2]. A digital scope instead feeds the signal to an analogue-to-digital converter, which samples it at a fixed rate and stores the numbers in memory [4]. A processor then draws, measures and analyses the stored waveform.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Vertical bandwidth of the Tektronix 511 (two-stage preamplifier)8MHz1948[3]
Introductory price of the Tektronix 511700USD1948[3]
Real-time bandwidth of the Keysight Infiniium UXR series110GHz2018[6]
Sample rate of the Keysight Infiniium UXR series256GSa/s2018[6]
Price Danaher paid for Tektronix2.85billion USD2007[2]

as of 2026-11-11. The 511 figures are from a university engineer's technical history [3]: 10 MHz with a one-stage preamplifier, and the year is the 1948 convention where it was shown (the paper's table gives 1946; production began in 1947 [2]). The UXR figures are from a 2018 trade journal report; 2018 is the publication year, as the page gives no other date [6].

Where it is used

The main places and products the technology is found in

  • Designing and debugging electronic circuits and computers
  • Testing high-speed data, optical and wireless links [6]
  • Physics laboratories, where LeCroy's fast digitisers began at CERN [4]
  • Servicing radios, televisions and other electronic equipment
  • Teaching electricity and electronics

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Users
No world count was found; oscilloscopes are standard equipment in electronics labs, factories and service shops
Note
The leading makers include Tektronix, Keysight and Teledyne LeCroy [2, 5, 6].

as of 2026-11-11

Sources

  1. Karl Ferdinand Braun Linda Hall Library, Scientist of the Day (Benjamin Gross), 2019
  2. Tektronix, Inc. The Oregon Encyclopedia (Oregon Historical Society)
  3. Oscilloscope Development, 1943-57 Peter D. Hiscocks, Ryerson University (PDF hosted by TekWiki), 2011
  4. When Oscilloscopes Went Digital Test & Measurement Tips (David Herres), 2014
  5. Remembering Walter LeCroy Teledyne LeCroy
  6. Keysight Real-Time Oscilloscopes Validate Terabit Research in Less Time Microwave Journal, 2018