Porcelain: Overview
What it does
The job the technology does for people, in a short paragraph
Porcelain is a hard, white, dense ceramic. It is made from kaolin, a white clay, with feldspathic rock and quartz, and fired hotter than ordinary pottery, typically above 1,200 to 1,300 °C [1][3]. It first appeared in northern China in the 500s [1], and Europe learned to make hard paste only in 1709 [2]. It serves as tableware, laboratory ware and electrical insulation [3].
as of 2026-11-11
How it works
The working principle in plain words, step by step
The body is a mix of clay (kaolin and ball clay), feldspar and quartz [3]. One laboratory body studied in 1916 was 55% clay, 20% feldspar and 25% quartz [3]. The paste is shaped, dried and fired. As the kiln gets hotter, the feldspar melts into a glass that flows between the grains, the clay breaks down into new mineral matter, and the open pores that let water in close up [3]. This glassy, sealed state is called vitrification. Firing temperatures vary with the body: about 1,250 to 1,275 °C for two electrical porcelains and 1,425 °C for that laboratory body in the 1916 study [3]. Chinese potters reached the same result with kaolin, with porcelain stone alone, or with a mix of the two [1].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Typical firing temperature of true porcelain, above | 1200 | °C | – | [1] |
| Mean firing temperature of late sixth-century Xing kiln porcelain, higher of two groups | 1279 | °C | 2024 | [5] |
| Firing temperature of a laboratory porcelain body | 1425 | °C | 1916 | [3] |
| Clay share of one laboratory porcelain body | 55 | % | 1916 | [3] |
| World kaolin output, estimate | 50 | Mt | 2025 | [4] |
| Share of United States kaolin used in ceramics | 20 | % | 2025 | [4] |
as of 2026-11-11. The 1916 figures describe bodies studied by the Bureau of Standards, not an average [3]; the Xing kiln figure is from a 2024 study of sixth-century ware, dated by publication [5]; the kaolin figures cover all uses, not porcelain alone [4].
Where it is used
The main places and products the technology is found in
- Tableware and decorative ware, from Chinese wares to Meissen [1][2]
- Chemical and laboratory porcelain [3]
- Electrical porcelain for insulators [3]
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- No world porcelain output was found; world kaolin output, of which ceramics take part, was about 50 Mt in 2025 [4]
- Unit
- Mt
- Year
- 2025
- Note
- In the United States 20% of kaolin went to ceramics [4].
as of 2026-11-11
Sources
- The Invention of Porcelain Gardiner Museum, Toronto
- German and Austrian Porcelain in the Eighteenth Century (Jeffrey H. Munger), Heilbrunn Timeline of Art History The Metropolitan Museum of Art, 2003
- Constitution and Microstructure of Porcelain (A. A. Klein), Technologic Paper No. 80 Bureau of Standards (now NIST), 1916
- Mineral Commodity Summaries 2026: Clays U.S. Geological Survey, 2026
- Researchers explore raw materials and firing technology for porcelain from late sixth-century Xing kiln (Zhang Nannan; on Zong et al., Archaeometry 2024, doi:10.1111/arcm.12969) Phys.org, 2024