Material Insights · Understanding the Material World

Porcelain: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Combustion chemistry Porcelain needs kilns burning fuel hot enough to fire it above 1,200 to 1,300 °C [1].

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1709Johann Friedrich Böttger, DresdenFound the materials needed to make white hard-paste porcelain in Europe [2]
1916A. A. Klein, Bureau of StandardsShowed under the microscope how firing breaks down the clay into new mineral matter and turns open pores into sealed ones [3]
2024Ruofei Zong and colleaguesShowed that late sixth-century Xing kiln porcelain was fired above 1,200 °C, some of it near 1,300 °C [5]

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Picture a jar of sand with a little sugar mixed in. Heat it until the sugar melts and it runs between the grains, then let it cool: the grains are now glued into a solid with few gaps. Porcelain works the same way. In the kiln, feldspar melts into a glass that flows between the grains of quartz and clay, and the clay itself breaks down into new mineral matter [3]. As the temperature rises, the open, connected pores shrink and the few that remain are sealed [3], so the finished piece does not soak up water. That glassy, closed structure is why porcelain is hard and dense. It needs a lot of heat: true porcelain is fired above 1,200 to 1,300 °C [1].

as of 2026-11-11

Sources

  1. The Invention of Porcelain Gardiner Museum, Toronto
  2. German and Austrian Porcelain in the Eighteenth Century (Jeffrey H. Munger), Heilbrunn Timeline of Art History The Metropolitan Museum of Art, 2003
  3. Constitution and Microstructure of Porcelain (A. A. Klein), Technologic Paper No. 80 Bureau of Standards (now NIST), 1916
  4. Researchers explore raw materials and firing technology for porcelain from late sixth-century Xing kiln (Zhang Nannan; on Zong et al., Archaeometry 2024, doi:10.1111/arcm.12969) Phys.org, 2024