Material Insights · Understanding the Material World

Potter's wheel

A spinning disc shapes clay quickly into round vessels; one of the first rotating machines.

Making things · Forming and joining · No. 490

  • Prehistoric
  • Readiness 9 of 9
  • Component
Making things · Technology

Potters were spinning clay on turning wheels more than 6,000 years ago in the Near East, using the energy of rotation to shape pots.

Chart: Illustration: Potter's wheel

Where it comes from

Chart: Map of where it comes from

Potters in the Southern Levant began using a turning wheel to shape coiled pots in the fifth millennium BC. Throwing whole pots from a lump on a fast wheel came more than three millennia later.

Three things to know
  1. The first wheel potters built pots from coils and used a wheel turning at about 80 rpm to thin and shape them.
  2. Throwing a pot from a solid lump needs about 150 rpm and took over three millennia more to become common.
  3. Early wheel potters were few, and some worked for elites or palaces.
The journey
  1. 1 ClayDug, cleaned and kneaded to an even, plastic body
  2. 2 CentringThe lump is pressed to the middle of the turning wheel
  3. 3 ThrowingThe potter's hands open and lift the clay into a wall as it spins
  4. 4 TrimmingThe leather-hard pot is turned again to shave the base
  5. 5 FiringThe dried pot is fired in a kiln
Covered in Force, motion and energy: the laws every machine obeysEngineering
Go deeper pick a tab to open it in full