Force, motion and energy: the laws every machine obeys
Every machine, however modern, obeys a few old laws. This module gives them in working form: inertia and force, weight and friction, work, energy and power, momentum and collisions, levers, pulleys and gears, torque and flywheels, and efficiency. Thirteen worked estimates, from a scooter to a 1,000-tonne express train, show how engineers audit a machine before they build it.
All courses / Understanding Engineering / Module 3Force, motion and energy: the laws every machine obeys
Every machine, however modern, obeys a few old laws. This module gives them in working form: inertia and force, weight and friction, work, energy and power, momentum and collisions, levers, pulleys and gears, torque and flywheels, and efficiency. Thirteen worked estimates, from a scooter to a 1,000-tonne express train, show how engineers audit a machine before they build it.
5 parts · 17 sections · about 50 minutes · 0 of 5 parts readBy the end you will be able to
- Apply the three laws of motion to find the force a vehicle needs to accelerate, hold speed or climb a slope
- Separate mass from weight and use the friction limit to say how hard a wheel can push or brake
- Calculate work, kinetic and potential energy and power, and audit a machine by following energy through its conversions
- Use momentum and impulse to explain why the length of a stop matters in collisions, crumple zones, belts and braking
- Explain how levers, pulleys and gears trade force for distance or torque for speed without creating energy
- Multiply link efficiencies along an energy chain and name the main causes of loss
Contents
- Part 1 Force, weight and friction: what pushes a machine and what holds it back
Every machine, from a bicycle to a goods train, is a device for making forces and steering them. This part gives you the three laws of motion in working form, separates mass from weight, and shows why friction is both the thing wheels depend on and the thing bearings fight. It builds on the estimating habits of module 2.
- A body keeps its motion until a net force changes it, and the change is force divided by mass
- Weight is the pull of the Earth on a mass, and on a slope only part of it works against you
- Friction is the grip that lets machines move, and the drag they are built to avoid
- Part 2 Work, energy and power: the engineer's first audit
Force tells you what a machine pushes with. Energy tells you what the push costs and where the cost goes. This part defines work, energy and power in the units an electricity bill uses, climbs a hill by bicycle to price it in joules and food, sizes a lift motor, and presents conservation of energy as a bookkeeping rule that every design must balance.
- Work is force through a distance, and it turns up as motion, height or heat
- Power is the rate of doing work, and it is what sizes motors, cables and fuel supply
- Conservation of energy lets you audit any machine: energy is moved and turned into heat, never made
- Part 3 Momentum, collisions and stopping: how safety design works
Crashes and emergency stops are about the same few ideas: how much motion a vehicle carries, how quickly it must be removed, and where the energy goes. This part introduces momentum and impulse, works a collision between a heavy and a light vehicle, shows how crumple zones and belts spread the stop, and sizes the braking of an express train. It gives principles, not accident reconstruction.
- Momentum and impulse: the same stop can be gentle or brutal, depending on how long it takes
- In a collision momentum is conserved, so the lighter vehicle takes the bigger jolt
- Crumple zones, belts and helmets stretch the stop and keep the cabin intact
- Braking a train turns motion into heat at a rate larger than the locomotive ever delivers in traction
- Part 4 Levers, pulleys, gears and wheels: trading force for distance
Simple machines do not create energy. They exchange force for distance, or torque for speed, so that a small push can move a large load slowly. This part states that one rule, then applies it to a village hand pump, a car jack, a crane hoist, a bicycle's gears and a potter's wheel, and ends with torque and the flywheel, which stores energy in rotation.
- A lever or ramp exchanges force for distance, and the work out never exceeds the work in
- Pulleys and hoists spread a load over several ropes, so a small tension lifts a heavy weight
- Gears and chains trade speed for torque, and a bicycle shows the arithmetic
- Torque and rotational inertia decide how fast things spin up and how much a flywheel can store
- Part 5 Efficiency and losses: putting the laws to work
Every machine is a chain of conversions, and each link keeps only a fraction of the energy it receives. This part multiplies efficiencies along an electric locomotive, lists where real machines lose energy and which of those losses can be cut, and finishes with a capstone estimate that uses force, power, energy and friction together to ask how long a heavy train takes to reach speed.
- Efficiency multiplies along a chain, so every link counts and the weakest costs most
- Losses come from a short list of causes, and each one points to a design remedy
- Capstone: how long does a heavy express take to reach speed, and what does that say about the design?
- Wrap-up Key terms, try it in the table, final quiz, sources