Force, motion and energy: the laws every machine obeys: Key terms, quiz and sources
All courses / Understanding Engineering / Module 3: Force, motion and energy: the laws every machine obeys Wrap-upForce, motion and energy: the laws every machine obeys: review
Key terms
- Inertia
- The tendency of a body to keep its velocity unless a net force acts on it.
- Net force
- The sum of all the forces on a body, with their directions counted.
- Newton
- The unit of force: the force that gives a mass of one kilogram an acceleration of one metre per second squared.
- Mass
- The amount of matter in a body, which measures its resistance to being accelerated.
- Weight
- The force of gravity on a mass, equal to mass x g, about 9.8 N for each kilogram near the Earth's surface.
- Friction
- The force that resists sliding between surfaces in contact, up to a limit of coefficient x pressing force.
- Rolling resistance
- The small drag on a rolling wheel from the flexing of the tyre and the ground.
- Work
- The product of a force and the distance moved along its direction, measured in joules.
- Kinetic energy
- The energy of motion, half x mass x speed squared.
- Potential energy
- The energy stored by position, such as mass x g x height for a raised body.
- Power
- The rate of doing work or using energy, measured in watts; one watt is one joule per second.
- Conservation of energy
- The law that energy changes form but the total does not change, which lets engineers audit any machine.
- Momentum
- Mass x velocity; the total in a collision is conserved.
- Impulse
- Force x time, equal to the change in momentum; a longer stop means a smaller force.
- Inelastic collision
- A collision in which momentum is conserved but kinetic energy is not, because some goes into damage and heat.
- Mechanical advantage
- The ratio of the force a machine delivers to the force put in, paid for by a matching loss of distance.
- Torque
- The turning effect of a force, equal to force x its perpendicular distance from the axis.
- Flywheel
- A heavy rotating wheel that stores energy and smooths out uneven driving or loading.
- Efficiency
- Useful output divided by input; the efficiencies of linked stages multiply.
Try it in the table
- Open 'Rail traction' and 'Railway electrification and wireless power'. Take the mass of a train you know and a published locomotive power, then repeat estimate 13 for your own route: how many minutes to reach line speed, and how far from the first station?
- Under 'Regenerative braking and motion recovery', read how much energy a stopping bus or train can return. Using half x mass x speed squared for a 12-tonne city bus at 40 km/h, work out the energy of one stop in kilowatt-hours and the share a typical recovery rate would give back.
- Open 'Three-point seat belt' and 'Anti-lock braking'. For a car you know, find a published braking distance from 100 km/h, work out the average deceleration as speed squared / (2 x distance), and compare it with the friction limit of 0.7 x 9.8 m/s2 for a dry road.
- Look at 'Lifting crane' and 'Tower crane'. Pick a crane you have seen, guess the load and the jib radius, and balance the turning effect with a counterweight as in part 4. How many tonnes at what distance would you need?
- Open 'Bicycle' and 'Gear train'. Count the teeth on the chainring and the smallest and largest sprockets of a bicycle you know, and work out the speed at 80 pedal turns a minute in each gear, using a wheel circumference of 2.1 m.
- Open 'Electric motors and drives' and 'Electric bus'. Using the efficiency chain in part 5, take a bus battery pack and a motor and drive efficiency from the site, and estimate how much of a 100 kWh battery reaches the wheels.
Final quiz
A 1,200 kg car accelerates from rest to 20 m/s in 10 s. What is the average net force on it?
Acceleration is 20 / 10 = 2 m/s2, and force = mass x acceleration = 1,200 x 2 = 2,400 N. Drag comes on top of this.A rail locomotive weighs 123 tonnes on its driven wheels and the dry steel-on-steel friction coefficient is about 0.27. About what is the largest pull it can give before the wheels slip?
The friction limit is 0.27 x 123,000 x 9.8, about 325,000 N. Locomotives are heavy because the pull is limited by the weight pressing on the rails.Which change reduces the kinetic energy of a vehicle most?
Kinetic energy goes as mass x speed squared. A quarter off the speed multiplies the energy by 0.75 x 0.75 = 0.56, a fall of 44 per cent, against 25 per cent for a quarter off the mass.A hand-pump handle gives a lever ratio of 5. The user pushes 60 N through 0.4 m. What does the rod deliver, ignoring friction?
The lever multiplies force by 5 and divides the movement by 5. Work in, 24 J, equals work out, 300 N x 0.08 m.A lift motor is sized for a full car going up with a counterweight equal to the car plus 45 per cent of the rated load. Roughly what share of the rated load does the motor have to lift?
The unbalanced mass is the load minus the 45 per cent the counterweight cancels, so about 55 per cent of the rated load, lifted at the lift speed.Why is it safer to stop a car with a 0.6 m crumple zone than with a rigid front, for the same speed?
The energy and momentum to be removed are fixed by speed and mass. Spreading the stop over more distance and time cuts the average force.A cyclist's drivetrain has a chain at 97 per cent efficiency and muscles at 25 per cent. If 53 kJ must reach the wheel, how much food energy is used?
Divide by both efficiencies: 53 / (0.97 x 0.25) is about 219 kJ. Most of it ends as body heat.A flywheel has its mass moved from near the axle to the rim at the same speed. What happens to the stored energy?
Rotational inertia grows with mass x distance squared, and stored energy is half x inertia x angular speed squared. Rim mass stores the most, up to the strength limit of the material.Sources for this module
- Bloomfield, How Things Work (Wiley, 2015) · ch. 1, 'The Laws of Motion, Part 1' (inertia, force, weight, work and energy); ch. 2, 'The Laws of Motion, Part 2' (torque, levers, friction, wheels, power, momentum and impulse); ch. 3, 'Mechanical Objects, Part 1' (collisions and energy transfers); ch. 4, 'Mechanical Objects, Part 2' (bicycles and their chain drive)
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 4, 'Conservation of Energy', https://www.feynmanlectures.caltech.edu/I_04.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 9, 'Newton's Laws of Dynamics', https://www.feynmanlectures.caltech.edu/I_09.html; ch. 10, 'Conservation of Momentum', https://www.feynmanlectures.caltech.edu/I_10.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 13, 'Work and Potential Energy (A)', https://www.feynmanlectures.caltech.edu/I_13.html; ch. 14, 'Work and Potential Energy (conclusion)', https://www.feynmanlectures.caltech.edu/I_14.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 18, 'Rotation in Two Dimensions', https://www.feynmanlectures.caltech.edu/I_18.html; ch. 19, 'Center of Mass; Moment of Inertia', https://www.feynmanlectures.caltech.edu/I_19.html
- RDSO (Ministry of Railways), Specification RDSO/2007/EL/SPEC/0048 Rev. 0, IGBT based three-phase drive electrics for WAG-9 and WAP-7 locomotives (January 2007) · WAP-7: starting tractive effort not less than 340 kN on dry rail; continuous power not less than 6,000 hp; maximum design speed 140 km/h; https://rdso.indianrailways.gov.in/uploads/files/48.pdf
- Wikipedia, 'Indian locomotive class WAP-7' (read November 2026, citing Chittaranjan Locomotive Works and Indian Railways data), and loco-info.com, WAP-7 entry (read November 2026) · secondary sources for weight 123 t and starting tractive effort about 322 kN; continuous power given as 4,563 kW (Wikipedia) or 4,740 kW (loco-info); https://en.wikipedia.org/wiki/Indian_locomotive_class_WAP-7; https://www.loco-info.com/view.aspx?id=13199
- Indian Railways Institute of Mechanical and Electrical Engineering, 'LHB Salient Features' (training notes, read November 2026) · weights of LHB coach types from 40.9 t to 53 t; axle-mounted disc brakes; https://rskr.irimee.in/sites/default/files/LHB%20Salient%20Features.pdf
- Modern Coach Factory, Raebareli, coach certificate for LHB AC three-tier coach 224647 (read November 2026) · tare weight 45.6 t; 72 berths; https://mcf.indianrailways.gov.in/uploads/NER224647L3T-2534.pdf
- Ideal Lifts, 'IL3 Eco-Drive lift' product page (UK maker, read November 2026) · 630 kg or 1,000 kg rated load; drive power 1.8 kW for the 0.5 m/s Eco-Drive; 2.45 kW for the conventional machine-room-less traction comparison at 1.0 m/s; https://www.ideallifts.com/new-lifts/lift-models/il3/
- Johns Hopkins University news release of 20 August 1999 on chain drive tests by J. B. Spicer and colleagues (ScienceDaily copy) · chain efficiency 81 to 98.6 per cent; larger sprockets and higher tension gave higher efficiency; lubricant made little difference; https://www.sciencedaily.com/releases/1999/08/990819180058.htm
- Spicer, Richardson, Ehrlich, Bernstein, Fukuda and Terada, 'Effects of frictional loss on bicycle chain drive efficiency', Journal of Mechanical Design, vol. 123, no. 4 (2001) · the peer-reviewed report of the same tests
- Autocar India, 'Bharat NCAP crash test rules revealed ahead of October 1 roll-out' (2023) · tests to AIS-197: frontal offset deformable barrier at 64 km/h, side impact, and side pole at 29 km/h for cars scoring 3 stars or more; M1 cars under 3.5 t; from 1 October 2023; https://www.autocarindia.com/industry/bharat-ncap-crash-test-rules-revealed-ahead-of-october-1-roll-out-429113