Digital telephony (PCM)
Speech is sampled and coded as numbers, so calls travel as digital bits without noise building up.
Moving information · Telecommunication · No. 465
- Electrical and chemical age
- Readiness 9 of 9
- Process
Digital speech began as a wartime secret: from 1943 secure calls were coded as numbers, nearly two decades before public telephone lines used it.
Chart: Illustration: Digital telephony (PCM)
Where it comes from
Chart: Map of where it comes from
Reeves proposed in 1937 to send sound as binary pulses so noise could not build up. The US Army then asked Bell Labs for secure speech, and SIGSALY went into use in 1943.
Three things to know
- Alec Reeves came up with PCM in 1937 as a way to beat noise by sending speech as on-off pulses.
- SIGSALY, put into use on 15 July 1943, was the first system to send speech by PCM.
- Each T1 line, introduced in 1962, carries 24 voice circuits as one 1.544 Mb/s pulse stream.
The journey
- 1 VoiceA microphone turns speech into a varying voltage
- 2 SamplingThe voltage is measured at regular, closely spaced moments
- 3 CodingEach measurement is rounded and written as a binary number
- 4 TransmissionBits from many calls are interleaved on one line and regenerated along the way
- 5 DecodingThe far end turns the numbers back into a voltage and a sound