Digital telephony (PCM): Overview
What it does
The job the technology does for people, in a short paragraph
Pulse-code modulation turns speech into a stream of binary numbers, so a call can travel long distances without picking up noise. Alec Reeves proposed it in 1937 [1]. The SIGSALY secure telephone used it from 1943 [2], and the Bell System's T1 carrier brought it into the public network in 1962 [3]. The ITU's G.711 standard sets out PCM for telephone voice [6].
as of 2026-11-12
How it works
The working principle in plain words, step by step
A telephone voice is a voltage that rises and falls with the sound. PCM measures that voltage at evenly spaced moments, many thousands of times a second. Nyquist showed that sampling at least twice as fast as the highest frequency keeps all the information [4]. Each sample is rounded to the nearest of a fixed set of levels and written as a binary number. The bits are sent as on-off pulses [1]. Along the line, repeaters only need to decide whether each pulse is a one or a zero and send a clean copy, so noise does not add up. Bits from many calls are interleaved: a T1 line carries 24 voice circuits in one 1.544 Mb/s stream [3].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Voice circuits per T1 carrier system | 24 | circuits | 1962 | [3] |
| Bit rate of a T1 (DS1) stream | 1.544 | Mb/s | 1962 | [3] |
| T-carrier systems in Bell metropolitan networks | 160,000 | systems | 1981 | [3] |
| SIGSALY terminals deployed | 12 | terminals | 1943 | [2] |
as of 2026-11-12. The 160,000 figure is 'approximately' and is given as current in a 1981 publication [3]; the T1 figures are those of the system introduced in 1962 as described in that publication; SIGSALY's twelve terminals were deployed over the war years from 1943 [2].
Where it is used
The main places and products the technology is found in
- Digital telephone trunks between exchanges, such as T1 lines [3]
- Telephone voice coded to the ITU's G.711 standard [6]
- Recorded digital audio, including compact discs [1, 7]
- Secure military voice links, where it began [2]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- About 160,000 T-carrier systems in Bell city networks [3]
- Unit
- T-carrier systems
- Year
- 1981
- Note
- No current world count was found; PCM is now built into nearly all digital voice equipment, so it is not counted separately.
as of 2026-11-12
Sources
- Pulse Code Modulation IEEE, Engineering and Technology History Wiki
- The Start of the Digital Revolution: SIGSALY Secure Digital Voice Communications in World War II (J. V. Boone and R. R. Peterson) National Security Agency, Center for Cryptologic History, 2000
- The Metropolitan Digital Truck Plant Nokia Bell Labs (publication record), 1981
- Harry Nyquist Encyclopaedia Britannica
- G.711: Pulse code modulation (PCM) of voice frequencies International Telecommunication Union (ITU-T), 1988
- 1979: Philips demonstrates digital compact disc Computer History Museum, The Storage Engine