Reverse osmosis desalination: Overview
What it does
The job the technology does for people, in a short paragraph
Reverse osmosis desalination turns sea water or brackish groundwater into drinking and industrial water. A membrane invented at UCLA in 1959 [1] made it practical, and the first plant ran in Coalinga, California, from 1965 [2]. It now accounts for about 65% of the world's installed desalination capacity [3], which together supplies about 95 million cubic metres a day [4].
as of 2026-11-11
How it works
The working principle in plain words, step by step
When fresh water and salt water are separated by a membrane that passes only water, water flows naturally into the salty side. This is osmosis, and the push behind it is called osmotic pressure. Reverse osmosis turns the flow around. A high-pressure pump raises the sea water to well above its osmotic pressure, typically 60 to 70 bar for sea water [3], and forces it against a very thin polymer membrane. Water molecules pass through; dissolved salts are almost all held back. The membranes are rolled into spiral cartridges inside pressure tubes. Only part of the feed gets through, often about half for sea water [3]; the rest leaves as concentrated brine. Before the membranes, the water is filtered and dosed with chemicals to stop fouling and scale. Energy recovery devices take back much of the pressure from the brine stream before it is discharged.
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Operational desalination plants worldwide, all methods | 15,906 | plants | 2018 | [4] |
| World desalinated water output, all methods | 95 | million m3 per day | 2018 | [4] |
| Share of installed desalination capacity using reverse osmosis | 65 | % | 2015 | [3] |
| Electricity used by large new sea water plants | 3.5 | kWh/m3 (3 to 4) | 2015 | [3] |
| Operating pressure of sea water systems | 65 | bar (60 to 70) | 2015 | [3] |
as of 2026-11-11. No source states the year its figures describe, so each row gives its source's publication year instead: 2018 for the plant count and output [4], 2015 for the reverse osmosis share, energy use and pressure [3]. The midpoints 3.5 kWh/m3 and 65 bar are calculated from the ranges given.
Where it is used
The main places and products the technology is found in
- Sea water desalination for city supplies in the Gulf, North Africa, Israel, Spain, Australia and California
- Brackish groundwater treatment inland
- Water reuse plants that purify treated sewage effluent
- Ultrapure water for chip factories, power stations and pharmaceuticals
- Ships, offshore platforms and household drinking-water filters
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- 15,906 operational desalination plants of all types [4], about 65% of capacity by reverse osmosis [3]
- Made per year
- About 95 million cubic metres of desalinated water a day from all methods [4]
- Unit
- plants; m3 per day
- Note
- Figures cover all desalination methods; the study does not split output by method.
as of 2026-11-11
Sources
- History of Nanofiltration Membranes from 1960 to 1990 (Charles Linder and Ora Kedem), in Nanofiltration: Principles, Applications, and New Materials, 2nd edition, chapter 1 Wiley-VCH, 2021
- Clean Water for All UCLA Samueli School of Engineering, 2019
- Salty solutions (Gregory P. Thiel), Physics Today 68(6), 66 to 67 American Institute of Physics, 2015
- The state of desalination and brine production: A global outlook (Jones, Qadir, van Vliet, Smakhtin and Kang), Science of the Total Environment 657 United Nations University (UNU-INWEH) collections, 2018