Reverse osmosis desalination
Pressure forces sea water through a membrane that lets water pass but holds back salt.
Building and shelter · Water and sanitation · No. 218
- Electronic age
- Readiness 9 of 9
- Process
Push sea water hard enough against the right plastic film and only fresh water comes through; most new desalination works this way.
Chart: Illustration: Reverse osmosis desalination
Where it comes from
Chart: Map of where it comes from
Two UCLA graduate students, Sidney Loeb and Srinivasa Sourirajan, made a cellulose acetate membrane in 1959 with far higher water flow than earlier ones. In 1965 it went to work in Coalinga, California.
Three things to know
- Sea water plants push water through membranes at about 60 to 70 bar, roughly 60 to 70 times the pressure of the air around us.
- Physics sets a floor of about 1 kWh of work per cubic metre; large new plants use about 3 to 4.
- Desalination makes about 1.5 litres of salty brine for every litre of fresh water, much of it returned to the sea.
The journey
- 1 IntakeSea water or brackish groundwater is drawn in
- 2 PretreatmentFilters and chemicals remove particles and stop scale
- 3 High-pressure pumpPumps raise the water to well above its osmotic pressure
- 4 MembraneWater passes through thin polymer membranes; the salt stays behind
- 5 Brine returnThe concentrated salty reject goes back to the sea
- 6 FinishingMinerals are added back and the water is disinfected for supply