What engineers do: rules of thumb, the method and the kinds of engineering knowledge
Engineering is a body of knowledge of its own, not just applied science. This module explains how engineers work under uncertainty with rules of thumb, safety margins and the best resources at hand, sorts the knowledge they use into six kinds, separates normal design from radical design, and maps the main fields onto the technologies and products on this site.
All courses / Understanding Engineering / Module 1What engineers do: rules of thumb, the method and the kinds of engineering knowledge
Engineering is a body of knowledge of its own, not just applied science. This module explains how engineers work under uncertainty with rules of thumb, safety margins and the best resources at hand, sorts the knowledge they use into six kinds, separates normal design from radical design, and maps the main fields onto the technologies and products on this site.
4 parts · 14 sections · about 45 minutes · 0 of 4 parts readBy the end you will be able to
- Explain how engineering differs from science in aim and in how its knowledge is judged
- Describe how engineers reach working designs with tested shortcuts, safety margins and whatever resources are on hand, before the full explanation exists
- Work three estimates on paper: evaporative cooling, a slab and rope, and a pump motor
- Name six kinds of design knowledge and give an example of each for a familiar device
- Tell normal design from radical design and spot a radical part inside a normal device
- Match the main engineering fields to technologies and products on the site and read a product through several fields
Contents
- Part 1 Engineering is not applied science
A common picture has scientists discovering and engineers applying. History does not support it well. Working devices often come first and the explanation later, engineers act on rough rules that have earned trust, and their profession keeps knowledge that no physics course teaches. This part sets out how the engineer's question differs from the scientist's, how decisions get made with partial facts, and why a margin of safety is the honest price of not knowing.
- Science asks why something happens; engineering asks what will work
- Engineers act on tested shortcuts when the facts are incomplete
- Best available resources and a safety margin turn uncertainty into a decision
- Part 2 The kinds of knowledge engineers use
Watch an engineer at work and you see more than one kind of knowing. Some of it is about purpose: what the device is for and how well it must do it. Some is about the device itself: the idea that makes it work and the layout everyone expects. Some is about quantity: how to calculate and which measured values to trust. And some is about real life: what goes wrong in use and how good designers decide. Naming the kinds shows what a technology still lacks.
- Every device rests on a working idea and a layout that experience has settled
- Targets, calculation methods and measured values turn a wish into numbers
- Lessons from use and the habits of good designers are the quiet half of the craft
- Knowledge comes from desks, test rigs, shop floors and users, and science is only one source
- Part 3 Normal design and radical design
Most of what engineers do is improve things whose working idea is already settled. A small part of engineering tries something whose working idea is unknown, with no promise that it will work. The two kinds of work need different knowledge, carry different risks and reward different habits. Knowing which kind a technology faces tells you a great deal about how fast it can improve and how likely it is to fail.
- Normal design improves a device whose working idea and shape are known
- Radical design starts with a working idea nobody has proved
- The line is blurred by levels: a radical part can sit inside a normal device
- Part 4 The fields of engineering and the road ahead
Engineers specialise, and their specialities line up with the technologies and products on this site. Real products, though, need several specialities at once. This part sketches the main fields, reads one product through all of them, and previews how the rest of the course builds intuition upward from physics.
- Four classic fields cover most of the built and powered world
- Newer fields grew from materials, information, life and the environment
- A single product draws on many fields: the electric bus as a worked example
- The rest of the course builds intuition from physics, one layer at a time
- Wrap-up Key terms, try it in the table, final quiz, sources