Material Insights · Understanding the Material World

What engineers do: rules of thumb, the method and the kinds of engineering knowledge: The fields of engineering and the road ahead

All courses / Understanding Engineering / Module 1: What engineers do: rules of thumb, the method and the kinds of engineering knowledge Part 4 of 4

The fields of engineering and the road ahead

Engineers specialise, and their specialities line up with the technologies and products on this site. Real products, though, need several specialities at once. This part sketches the main fields, reads one product through all of them, and previews how the rest of the course builds intuition upward from physics.

4.1 Four classic fields cover most of the built and powered world

Civil engineers look after what stays in one place and bears weight: homes and towers, highways and railway formations, bridges, dams, tunnels, and the pipes that bring water in and take sewage out. Their physics is the balance of forces, the strength of materials, and the behaviour of soil and water. On this site, find them in Masonry arch, Aqueduct, Reinforced concrete, Cable-stayed bridge, Steel-frame skyscraper and Seismic base isolation, and in the Steel reinforcing bar product.

Mechanical engineers deal with things that move, and with machines that make or consume power: engines and turbines, pumps and compressors, gearboxes, lathes and cooling plant. Their physics is motion, force, heat and flow. Look at Steam engine, Gear train, Machine tool, Internal combustion engines and gensets, and Heat pumps, air conditioning and refrigeration among technologies, and Centrifugal water pump, Refrigerator and Passenger car among products. It is the widest of the classic fields.

Electrical engineers handle electricity from generation to use, and the signals that carry information: motors and generators, transformers and grids, lighting, controls and communication links. Their physics is electric and magnetic fields and circuits. See Electric motors and drives, Generators and alternators, AC transmission, HVDC links and Transformers and power electronics. The Electric motor and Transformer and power converter products belong here.

Chemical engineers scale reactions and separations up to the size of a plant, turning raw materials into fuels, fertiliser, plastics, medicines, cement and food. Their physics and chemistry is heat, mass transfer and reactions at scale. Look at Haber-Bosch ammonia synthesis, Distillation, Refining and reforming, and Reverse osmosis desalination. Module 10 returns to this field.

These four came first because they dealt with the largest flows of material and energy. A rough guide: civil carries, mechanical moves, electrical energises and controls, chemical transforms. The edges are blurred. A power station needs all four, and so does every large plant.

Data Four classic fields, their core question and examples on the site
FieldCore questionTechnology examplesProduct examples
CivilWill it carry load and last?Reinforced concrete; Cable-stayed bridgeSteel reinforcing bar; Precast concrete products
MechanicalWill it move and manage heat?Gear train; Machine toolCentrifugal water pump; Refrigerator
ElectricalWill power and signals behave?Electric motors and drives; AC transmissionElectric motor; Transformer and power converter
ChemicalWill the reaction run at scale and safely?Haber-Bosch ammonia synthesis; DistillationAntibiotic medicines; PET bottle
Source: Kosky et al., Exploring Engineering (Academic Press, 2013), ch. 1, 'What Engineers Do'
  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 1, 'What Engineers Do'

4.2 Newer fields grew from materials, information, life and the environment

As technology spread, newer fields split off. Materials engineers create and test metals, ceramics, polymers, semiconductors and composites to meet a need for strength, heat resistance or electrical behaviour; find their work in Stainless steel, Hall-Heroult aluminium smelting and Carbon fibre composites. Computer engineers build chips, circuit boards and the software that runs on them: Integrated circuit, Microprocessor, Operating system and Packet switching. Aerospace engineers take on flight and space, from Powered fixed-wing aeroplane to Fly-by-wire flight control and Orbital launch vehicle.

Biomedical engineers bring engineering to medicine, in devices such as the Coronary stent and Magnetic resonance imaging. Environmental engineers protect water, air and land, for instance with Sand filtration of drinking water, Sewerage and Activated sludge sewage treatment. Industrial and manufacturing engineers design the making itself: Moving assembly line, Statistical quality control, Lean production and Industrial robot. Nuclear engineers work on reactors and their fuel (Nuclear fission reactors). Agricultural engineers cover irrigation, farm machines and the handling of crops after harvest, such as Drip irrigation and Farm tractor.

A field is not the only way to sort engineers. The same civil engineer might spend a career drawing new bridges, running a test laboratory, managing a construction site, advising lenders, or inspecting old bridges for a railway. The field tells you which physics and materials a person knows; the role tells you where in a product's life they work. An investor meets all of them, and the most useful question to put to a company often depends on which role the engineer across the table holds.

Whatever the field, engineers share habits: they turn questions into quantities with units, work in teams, check before they release, and keep records of what they did. The estimating tools taught in the next module belong to all of them.

Value chain Newer fields and where to find them on the site
  • Engineering fields beyond the classic four
    • Materials Stainless steel; Carbon fibre composites
    • Computer Integrated circuit; Operating system
    • Aerospace Powered fixed-wing aeroplane; Fly-by-wire flight control
    • Biomedical Coronary stent; Magnetic resonance imaging
    • Environmental Sewerage; Sand filtration of drinking water
    • Industrial and manufacturing Moving assembly line; Lean production
    • Nuclear Nuclear fission reactors
    • Agricultural Drip irrigation; Farm tractor
Source: Kosky et al., Exploring Engineering (Academic Press, 2013), ch. 1, 'What Engineers Do'
  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 1, 'What Engineers Do'

4.3 A single product draws on many fields: the electric bus as a worked example

Take the Electric bus in the Products table. Which fields stand behind it? The body and floor are structural: civil and mechanical ideas of loads and fatigue. The wheels, brakes, suspension and doors are mechanical. The motor, inverter, charger and wiring are electrical. The cells and their packaging draw on chemical and materials engineering. Battery management and route software are computer engineering. The factory that builds it needs manufacturing engineers. The depot, with its chargers and grid connection, is a civil and electrical project. The tyres and brake linings are materials problems. Even a modest-looking vehicle is a meeting place of at least six fields.

A first estimate shows how fields cooperate. Say a 12 m bus uses about 1.2 kWh per kilometre in city service and carries a 300 kWh battery pack. Units first: kWh divided by kWh per km gives km. Range is 300 / 1.2 = 250 km. In practice, designers keep a reserve and avoid deep discharge to protect cells, so usable range is perhaps 80 per cent of that, near 200 km. Check: an ICCT study of India's PM e-Bus Sewa fleet assumes up to 1.3 kWh per km for 12 m buses, and ITDP India advises packs above 300 kWh for routes of 180 to 230 km a day, so the estimate is in the right area.

The trade-off sits in the pack. More cells give more range but weigh more, and a heavier bus uses more energy per kilometre and carries fewer passengers within its axle-load limit. A smaller pack with fast chargers along the route reduces weight but needs grid capacity at the stops. Engineers in several fields must agree on a compromise.

For you as an investor, this view is practical. When a company says it has solved a problem, ask which field made the advance and which others must follow. A better cell does nothing for a bus if the depot grid is weak.

Data The electric bus read through the engineering fields
Part of the busMain fieldExample question
Body, floor, doorsCivil and mechanicalWill the structure carry passengers and survive potholes?
Motor, inverter, chargerElectricalDoes the power electronics keep efficiency high across the load range?
Cells and packChemical, materials, thermalDoes the chemistry give enough life at city temperatures?
Battery management and route softwareComputerDoes the software protect the cells and plan charging?
Factory and supply chainIndustrial and manufacturingCan the plant reach the volume and quality needed?
Depot and grid connectionCivil and electricalCan the local network supply the evening charge?

Based on the product entry 'Electric bus' and the technologies 'Electric and hybrid vehicles' and 'Lithium iron phosphate batteries'.

  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 1, 'What Engineers Do'
  • ICCT, 'Emissions reduction and benefits of the first 3,825 electric buses under PM e-Bus Sewa' (November 2024) · 1.3 kWh per km assumed for 12 m e-buses (upper limit from the CESL tender), https://theicct.org/emissions-reduction-and-benefits-of-the-first-3825-electric-buses-under-pm-ebus-sewa-nov24
  • ITDP India, 'E-Bus Basics' (2023) · batteries above 300 kWh recommended for daily routes of 180 to 230 km, https://itdp.in/wp-content/uploads/2023/07/E-Bus-Basics.pdf

4.4 The rest of the course builds intuition from physics, one layer at a time

Rules of thumb are strongest when you also know why they work. A mason's proportion makes more sense once you understand forces and stress. A pump estimate is easier to trust when you understand energy and efficiency. The remaining modules therefore climb through the physics that engineers lean on, always returning to devices.

Module 2 teaches the habits of estimation: units, scaling and educated guessing. Module 3 sets out the laws of force, motion and energy that every machine obeys. Module 4 turns to structures and materials, and why things break. Module 5 covers fluids, lift and drag. Module 6 covers heat and the limits of engines and heat pumps. Module 7 looks at vibration and resonance. Module 8 covers electricity and magnetism, from circuits to grids. Module 9 follows light and semiconductors to the network. Module 10 goes down to the atomic scale for chemistry and process. Module 11 explains feedback and control, how machines are made to behave. Module 12 returns to design, failure and safety, with the full story of how knowledge grows. Module 13 closes with cost, trade-offs and resources.

Physics enters as a set of principles, a handful of laws and a lot of intuition. For deeper reading on the physics itself, the Feynman Lectures on Physics, free to read online from Caltech, are a classic: chapter 1 of volume I is about atoms and chapter 4 about the conservation of energy. Treat them as further reading; this course does not follow their order.

A suggestion for your approach: after each module, pick one technology or product on the site and redo a small estimate of your own. Skill with numbers, like skill with a spanner, comes from using it.

Data The course in one view
ModuleThemeFields it feeds
1 What engineers doMethod and kinds of knowledgeAll
2 Thinking in estimatesUnits, scaling, educated guessingAll
3 Force, motion and energyLaws every machine obeysMechanical, civil, aerospace
4 Structures and materialsStress, strength, breakingCivil, materials, mechanical
5 FluidsPressure, flow, lift, dragMechanical, aerospace, chemical
6 Heat and thermodynamicsEngines, heat pumps, limitsMechanical, chemical, power
7 Vibration and wavesResonance in machines and structuresCivil, mechanical, electrical
8 Electricity and magnetismCircuits, motors, gridsElectrical
9 Light, semiconductors, informationTransistor to networkComputer, electrical
10 Matter and processBonds, reactions, plantsChemical, materials
11 Control and systemsFeedback and stabilityAll, especially electrical and mechanical
12 Design, failure, safetyHow knowledge growsAll
13 Cost, trade-offs, resourcesWhy best is rarely strongestAll
  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 1, 'What Engineers Do'
  • Hammack, The Things We Make (Sourcebooks, 2023) · ch. 6, 'Science: The Gold Standard for Rules of Thumb'

See it in the table

H₂O WaterAl AluminiumSt SteelCem CementNH3 AmmoniaNFR Nuclear fission reactorsHVAC AC transmissionHVDC HVDC linksICE Internal combustion engines and gensetsGen Generators and alternatorsMot Electric motors and drivesPE Transformers and power electronicsHP Heat pumps, air conditioning and refrigerationRef Refining and reforming

Check your understanding

Which pairing of field and core question is best matched?

Electrical engineers deal with current, signals and power. The other pairings mix up the fields.

A bus has a 300 kWh pack and uses 1.2 kWh per km. What is the ideal range, ignoring reserve?

Range is energy divided by energy per kilometre: 300 / 1.2 = 250 km. Keeping a reserve lowers the usable figure.

Why does a single product like an electric bus need several engineering fields?

Structure, power electronics, chemistry, software and manufacturing each belong to different fields, and the product works only if all of them do.
← Part 3: Normal design and radical designMark read · Wrap-up →