Sword: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Dislocations in crystals Metals can bend a little instead of shattering because flaws called dislocations move through their crystals; this is why a metal blade can be long and thin without snapping.
as of 2026-11-10
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1934 | Egon Orowan, G. I. Taylor and Michael Polanyi | Each proposed the dislocation, the moving crystal flaw that lets metals deform [8] |
| 1947 | Several research groups | Dislocations are shown to exist by experiment [8] |
as of 2026-11-10. Swords are about 5,000 years older than this science, which explains why metal blades work rather than made them possible.
The science explained
The science behind it explained for a curious reader
Try to make a long blade from flint and it will snap the first time it hits something; make it from wood and it will not hold an edge. Metal can do both jobs because of how its atoms are arranged. A metal is made of tiny crystals, and each has flaws in its rows of atoms called dislocations. When the metal is pushed hard, these flaws slide through the crystal, so the metal bends a little instead of cracking. The idea was proposed by three scientists independently in 1934 and proved by experiment in 1947 [8]. Smiths knew none of this, but over thousands of years they learned by trial to make blades that held an edge and survived a blow.
as of 2026-11-10
Sources
- Dislocations: introduction (Teaching and Learning Packages) DoITPoMS, University of Cambridge