Material Insights · Understanding the Material World

Thermocouple

Two metals joined make a voltage that tells the temperature, even in furnaces.

Sensing and measurement · Measurement · No. 481

  • Second industrial revolution
  • Readiness 9 of 9
  • Component
Sensing and measurement · Technology

Two different wires twisted together make a voltage when heated: the simplest way to read the heat of a furnace.

Chart: Illustration: Thermocouple

Where it comes from

Chart: Map of where it comes from

Thomas Seebeck announced in 1821 that a circuit of two metals carries a current when one joint is heated. From 1885 Henri Le Chatelier's platinum and platinum-rhodium couple, built to control cement making, turned the effect into a reliable furnace thermometer.

Three things to know
  1. A thermocouple measures only the difference in temperature between its hot and cold ends, so the cold end must be known.
  2. Letter names for thermocouple types were adopted in 1964 as an American national standard and are now set by IEC 60584-1.
  3. Types B, R and S are made of platinum and rhodium; types E, J, K, N and T use base-metal alloys such as chromel, 90% nickel.
The journey
  1. 1 MetalsAlloys of nickel, chromium, copper, platinum or rhodium
  2. 2 WireTwo different wires are drawn to a matched standard
  3. 3 JunctionThe wires are joined at the hot end and sheathed
  4. 4 SignalHeat makes a voltage of a few microvolts per degree
  5. 5 ReadingA meter converts the voltage to temperature with standard tables
Covered in Heat and thermodynamics: engines, heat pumps and their limitsEngineering
Go deeper pick a tab to open it in full