Xerography (photocopying): Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs- Se Selenium criticality low Battelle chose selenium as the photoconductor for the first machines because it insulates in the dark and conducts in light [2, 4]; later drums mostly use other photoconductors.
- Al Aluminium criticality low The photoconductive coating is laid on a metal drum; Haloid's early machines used an aluminium drum coated with selenium [2].
- St Steel criticality low Frames, rollers and paper paths of copiers are largely steel.
- CB Carbon black criticality low Black toner is a fine plastic powder coloured with pigment such as carbon black.
as of 2026-11-11. No opened source gives material amounts per machine; criticality is the writer's judgement: all four materials are made in large amounts for other uses.
Critical materials
The materials whose supply could hold it back
- No material is likely to hold xerography back: the drum, toner and frame materials are common.
- Selenium was the key material of the first copiers [4], but the process does not depend on it alone, since other photoconductors can do the same job.
as of 2026-11-11
Sources
- Light and Static: The Origins of the Xerox Copy The Henry Ford
- The Story of Xerography Xerox Corporation