Material Insights · Understanding the Material World

Xerography (photocopying): Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Photoelectric effect Light frees charges inside the photoconductor, so lit areas lose their charge and dark areas keep it.
  • Electrostatics (Coulomb's law) Opposite charges attract, so charged toner sticks to the charged image and then to the more strongly charged paper.
  • Band theory of solids Photoconductors are materials whose electrons need only the energy of visible light to jump into a state where they can carry current.

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1873Willoughby SmithFound that selenium's electrical resistance changes sharply with the light falling on it, the effect xerography later used [6]
1938Chester Carlson and Otto KorneiShowed that a charged photoconductive plate holds a powder image after exposure to light, making the first copy [2]

as of 2026-11-11. Battelle's later finding that selenium was an ideal photoconductor for a copier is undated in the sources [4].

The science explained

The science behind it explained for a curious reader

Picture a blackboard dusted evenly with chalk-attracting static. Shine a torch on it through a stencil, and wherever the light falls the static drains away. Blow fine chalk dust at the board and it clings only where the static is left, tracing the stencil's shape. Press paper against the board and the dust moves across. That is xerography. The trick is a photoconductor, a material that holds charge in the dark but lets it leak away in light. Selenium does this, a property found in 1873 [6]. Toner sticks because opposite charges attract, and heat then melts the powder so the copy is permanent.

as of 2026-11-11

Sources

  1. Light and Static: The Origins of the Xerox Copy The Henry Ford
  2. Willoughby Smith Discovers the Photoconductivity of Selenium HistoryofInformation.com (Jeremy Norman)