Material Insights · Understanding the Material World

Earth's surface: land, water, ice and erosion: Key terms, quiz and sources

All courses / Understanding Science / Module 19: Earth's surface: land, water, ice and erosion Wrap-up

Earth's surface: land, water, ice and erosion: review

Key terms

Stress and strain
Stress is force per unit area on rock; strain is the bending or breaking that results, as folds or faults.
Anticline and syncline
A fold that arches up, and a fold that sags down.
Thrust fault
A low-angle reverse fault in which compression pushes one block up and over another, as in the Himalaya.
Weathering
The breakdown of rock where it lies, by mechanical and chemical means, without any carrying away.
Erosion and deposition
The carrying away of weathered material by water, ice, wind or gravity, and its dropping somewhere else.
Frost wedging
The prying apart of rock by water that expands by about 9 per cent as it freezes in cracks.
Laterite
A hard red soil rich in iron and aluminium oxides, left when heavy tropical rain leaches out the soluble ions.
Soil horizon
One of the layers of a soil profile, from the humus-rich top to the weathered rock below.
Mass wasting
The downhill movement of soil and rock under gravity, from slow creep to sudden landslides.
Pore pressure
The pressure of water filling the spaces between grains, which pushes them apart and reduces friction.
Meander
A bend in a river that grows because the outer bank is eroded and the inner bank gains sand.
Delta
A fan of sediment dropped where a river enters still water and slows.
Porosity and permeability
The fraction of rock that is empty space, and the ease with which water can flow through the connections between the pores.
Aquifer and water table
A rock layer that stores and yields useful water, and the top of the saturated zone below ground.
Karst
Landscape of caves, sinkholes and disappearing streams made by water dissolving limestone.
GRACE
A pair of satellites that sense changes in Earth's gravity, used to track changes in the mass of water, including groundwater.
Moraine and erratic
A heap of rock and debris left by a glacier, and a boulder carried far from its source and left stranded.
Milankovitch cycles
Slow changes in orbit shape, axial tilt and wobble, with periods of about 100,000, 41,000 and 23,000 years, that pace the ice ages.
Sediment core
A column of mud drilled from the sea floor whose layers and shells record past climate.
Continental shelf
The gently sloping, drowned edge of a continent, extending to depths of about 150 metres.
Salinity
The mass of dissolved salts per mass of sea water, averaging about 35 grams per kilogram.
Upwelling
The rise of cold, nutrient-rich deep water to the surface, as off the west coast of India in the monsoon.
Longshore drift
The zigzag movement of sand along a shore, because waves arrive at an angle and the backwash runs straight down.
Denudation
The overall lowering of land by weathering and erosion.

Try it in the table

  • Open the node 'Soil science (pedology)'. Take a field of 1 hectare (10,000 square metres) losing 1 mm of topsoil a year, and work out the volume and the mass lost (use 1.3 tonnes per cubic metre), then compare with the roughly forty-times slower formation rate in Part 2.
  • Open the node 'The water cycle'. List the stores and flows and mark which are driven by the Sun and which by gravity. Then use the 35 million cubic km of fresh water and a 245 cubic km yearly Indian extraction to say why the average hides local shortage.
  • Open the node 'Stratigraphy'. Treat one metre of delta sediment as the layer laid down at 4.5 mm a year and work out how many years it covers, then read the node's rules to say which layer is oldest.
  • Open the node 'Plate tectonics' and the module 'The solid Earth'. Link the Himalayan thrusts, the Bengal Fan and the Andaman trench to the three kinds of boundary, and say which landforms in this module belong to each.
  • Open the node 'Greenhouse effect'. Read how carbon dioxide traps heat, then write down how it would amplify the Milankovitch cycles in Part 4, and what the 65 per cent faster ice loss in 2011 to 2020 suggests about the present.
  • Open the engineering module 'Fluids' and the node 'Seismic waves' if you want a sense of flow and shaking. Pick a slope you know, such as a hill road cutting, list the factors for stability from Part 2, and say what extra water would do.

Final quiz

A 1 metre cube of rock is cut into 1 centimetre cubes. The total surface area becomes

Area scales as 1 / size for a fixed volume: 6 square metres becomes 600 square metres.

Which pair describes chemical weathering of feldspar and of limestone?

Hydrolysis turns feldspar to clay, and carbonic acid dissolves calcium carbonate.

Soil forms at about 1 cm in 300 years. A slope loses 1 mm a year. How many years to lose 10 cm?

10 cm is 100 mm, and 100 mm / 1 mm a year is 100 years, compared with 3,000 years to rebuild.

Which best explains why the Wayanad slopes failed in July 2024?

The Geological Survey of India assessed that pore pressure from heavy rain in loose material was the trigger; 586 mm fell in two days at the nearest station.

A stream's speed rises from 1 m/s to 2 m/s in a flood. The weight of stones it can move rises by about

The weight rises with the sixth power of speed: 2 to the sixth is 64.

If 109 cubic km of groundwater were lost over six years from northern India, the average yearly loss is about

109 divided by 6 is about 18 cubic km a year, roughly 7 per cent of India's 245 cubic km yearly extraction.

Why does a bigger number of tiny pores in clay not make a good aquifer?

Porosity is storage, permeability is flow. Clay stores much but gives up very little.

How did Hays, Imbrie and Shackleton show that orbital cycles pace the ice ages?

Oxygen in the shells records ice volume, and in two southern Indian Ocean cores its rhythms matched the orbital periods.

A salt layer made from all the sea's salt, spread over land, would be about

4.8 x 10^19 kg of salt at 2,160 kg per cubic metre is 2.2 x 10^16 cubic metres, over 1.49 x 10^14 square metres of land.

A sea-level rise of 0.2 m on a shore sloping 1 in 100 gives a rough retreat of

Retreat is the rise divided by the slope: 0.2 x 100 = 20 m, a rule of thumb for sandy beaches.
Next module: Weather, climate and natural hazards →

Sources for this module