Motion and force: from Aristotle to Newton
A body keeps moving unless something changes its motion, and that one idea overturned two thousand years of physics. This module traces the path from Aristotle through Galileo's ramps to Newton's three laws, and gives the words and tools for using them: speed, velocity, acceleration, friction, equilibrium, free fall, terminal speed, interaction pairs and vectors.
All courses / Understanding Science / Module 2Motion and force: from Aristotle to Newton
A body keeps moving unless something changes its motion, and that one idea overturned two thousand years of physics. This module traces the path from Aristotle through Galileo's ramps to Newton's three laws, and gives the words and tools for using them: speed, velocity, acceleration, friction, equilibrium, free fall, terminal speed, interaction pairs and vectors.
6 parts · 19 sections · about 55 minutes · 0 of 6 parts readBy the end you will be able to
- Explain why Aristotle's rule that motion needs a mover seemed right, and what Galileo's ramps and Newton's first law replaced it with
- Distinguish mass from weight, and speed from velocity from acceleration, with correct units
- Find the net force on a body and say when it is in equilibrium, including a body moving at steady speed
- Use acceleration = net force / mass to predict motion, and to explain free fall and terminal speed
- Name the partner of any force under Newton's third law and say why the pair never cancels
- Add vectors and split a force into components to handle rivers, slopes and slanting ropes
Contents
- Part 1 Why Aristotle was wrong and Galileo was right: the idea of inertia
For about two thousand years the best-educated people believed that a moving thing needs a continual push to keep moving. It matches daily life: a cart stops when the bullocks stop. This part follows how that belief was tested, why it fails, and what replaced it. The replacement, inertia, is the foundation of everything else in this module.
- Aristotle's rule that motion needs a mover fits daily life and fails at the edges
- Galileo's ramps and thought experiments showed that motion continues by itself
- Mass measures inertia, and weight is a separate thing that changes with place
- Part 2 Describing motion: speed, velocity, acceleration and free fall
Before asking what causes motion, we need exact words for it. Three quantities do the work: speed, velocity and acceleration. They are easy to mix up, and most errors in mechanics start there. This part defines them from everyday journeys, then uses them on the simplest motion of all, a body falling freely, and shows how a jumper's time in the air follows from the height reached.
- Speed says how fast, velocity also says which way, and the difference matters
- Acceleration is the rate at which velocity changes, whether by speeding up, slowing down or turning
- In free fall every body gains speed at the same rate, and that fixes how long a jump lasts
- Part 3 Forces in balance: net force, support and friction
A force is a push or a pull, and it has a size and a direction. Usually several act on one body at once. What the body does depends on their sum, called the net force. This part shows how to add forces, why a book on a table obeys the same rules, and how friction, the force that most often hides inertia, works. It also looks at where friction shapes life, space and the Earth.
- The net force is what counts, and it is found by adding forces as arrows
- At rest, forces balance, and a table pushes up on a book because the table is slightly squashed
- Friction opposes sliding, and a body moving steadily is in equilibrium too
- Friction at every scale: faults, meteors, joints and engines
- Part 4 Newton's first two laws: force, mass and acceleration
Galileo's inertia says what happens with no net force. Newton's second law says what happens with one: the body accelerates, by an amount set by the force and the mass. This part states both laws, shows why the equation has the shape it does, uses it to explain why heavy and light bodies fall alike in a vacuum, and then adds air to see why falling bodies in real life reach a top speed.
- The first two laws say that force changes motion, in proportion to the force and against the mass
- Mass cancels from the fall of a body, so heavy and light things accelerate alike in a vacuum
- Air resistance grows with speed until it equals the weight, and then the fall stops speeding up
- Part 5 Forces come in pairs: Newton's third law
No force acts alone. Every push or pull is one half of an interaction between two bodies, and the other half acts on the other body. That is the third law. It is easy to misuse, because the two forces of a pair never act on the same body. This part states it, clears up the standard puzzle about why pairs do not cancel, and then shows how animals and rockets move by it.
- A force is half of an interaction, and the two halves are equal, opposite and on different bodies
- Equal forces on two bodies give unequal accelerations, and that explains why pairs do not cancel
- Walking, swimming and flying all work by pushing on something and being pushed back
- Part 6 Vectors and the Newtonian synthesis
Forces, velocities and accelerations all have direction, and a single tool handles all of them: the vector. This part shows how to add vectors, how to split one into components along convenient axes, and why that makes slopes and rivers easy. It then puts the three laws together as one system, tells how Newton built it, and says where it stops being exact.
- Vectors add as arrows, and perpendicular parts do not interfere
- Splitting a force into components explains why slopes hold or slide
- The three laws form one system, tested by prediction, and they hold with known limits
- Wrap-up Key terms, try it in the table, final quiz, sources