Material Insights · Understanding the Material World

Waves: sound, light, colour and the wave-particle puzzle: Light: its speed, its spectrum, and what happens when it meets matter

All courses / Understanding Science / Module 7: Waves: sound, light, colour and the wave-particle puzzle Part 3 of 6

Light: its speed, its spectrum, and what happens when it meets matter

Light is a transverse wave of electric and magnetic fields, as 'Electricity and magnetism' showed. This part tells how its speed was caught, what the full spectrum contains beyond the colours we see, how it reflects, and why some materials pass it, some absorb it and metals send it back. Lenses, fibres and sensors that use these facts belong to Understanding Engineering, in 'Light, semiconductors and information'.

3.1 Light's speed is finite, was first caught from the moons of Jupiter, and since 1983 it defines the metre

Light seems instant, and Galileo's attempt to time a lantern flash between two hills found nothing: the delay was far below human reaction time. The first proof that light takes time came from the sky. In 1676 the Danish astronomer Ole Rømer, working in Paris, timed the moon Io as it passed into Jupiter's shadow. Io's eclipses repeat about every 42.5 hours, but they ran late when the Earth was moving away from Jupiter and early when it approached. The delay added up over months: light needed extra time to cover the extra distance. Rømer estimated that light takes about 22 minutes to cross the width of the Earth's orbit, and he gave no speed in earthly units. In 1690 Christiaan Huygens used Rømer's delay to give the first numerical value for the speed of light. Divide today's orbit size by 22 minutes and you get about 230,000 km/s (calculated): the right order of magnitude, if about a quarter too low.

On the ground, Hippolyte Fizeau in France in 1849 sent a beam through the gaps of a spinning wheel with 720 teeth to a mirror on Montmartre, 8,633 m away, and back. If the wheel turns at the right rate, the returning light meets a tooth where it left through a gap. That happened at 12.6 turns a second, and from it he found 313,300 km/s, about 5% too high.

Lasers then allowed frequency and wavelength to be measured together, and in 1983 the General Conference on Weights and Measures chose to fix the speed of light at 299,792,458 m/s exactly. The metre is now the distance light travels in 1/299,792,458 of a second. Time can be measured far more precisely than length, so this ties length to the best clock. The speed of light is no longer measured; it is a definition. The 2018 revision of the SI reworded this, as 'How science knows' described, but kept the number.

Data Worked estimate: reproducing the old measurements, and the delay to a spacecraft
CaseWorkingResult
Rømer: light crossing the Earth's orbit (diameter 2 x 1.496 x 10^11 m)2.99 x 10^11 m / 3.00 x 10^8 m/sabout 1,000 s, 16.6 minutes (calculated)
Rømer's own estimate of 22 minutes2.99 x 10^11 m / 1,320 s2.3 x 10^8 m/s, about 25% low (calculated)
Fizeau: round trip 2 x 8,633 m17,266 m / 3.00 x 10^8 m/s58 microseconds (calculated)
Fizeau: 720 teeth, so gap becomes tooth after 1/1,440 of a turn; at 12.6 turns a secondtime = 1 / (1,440 x 12.6 per s) = 55 microseconds (calculated)speed = 17,266 m / 55.1 microseconds = 3.13 x 10^8 m/s (calculated)
Radio to the Moon (384,400 km)384,400 km / 299,792 km/s1.28 s one way (calculated)
Radio to Mars at its nearest (54.6 million km) and farthest (401 million km)distance / 299,792 km/s3.0 minutes and 22 minutes (calculated)

Calculated. Fizeau's 720 teeth, 8,633 m and 12.6 turns a second are from the account of his 1849 experiment; Rømer's 22 minutes from Britannica and Optica's history of his work; Mars distances from the NASA Mars fact sheet.

Source: American Physical Society, This Month in Physics History: Fizeau and the speed of light (July 1849), https://www.aps.org/apsnews/2010/07/fizeau-speed-of-light-experiment (Roemer 1676, about 240,000 km/s; Fizeau's cogwheel and mirror 8 km apart, 313,300 km/s, about 5% high)

3.2 Visible light is a sliver of one spectrum: the same wave at other wavelengths is radio, infrared, ultraviolet, X ray or gamma ray, each acting on matter differently

We see only a narrow band, from about 400 nm (violet) to 700 nm (red). The visible range spans a frequency ratio of only 1.75, less than one octave, while the whole electromagnetic spectrum from long radio waves to gamma rays spans about 50 octaves. The rest was found in turns. In 1800 William Herschel put a thermometer beyond the red end of a prism's spectrum and it warmed: infrared. In 1801 Johann Ritter found that silver chloride darkened beyond the violet: ultraviolet. Hertz made radio waves in 1887 and Röntgen discovered X rays in 1895.

All of these are the same kind of wave, in vacuum all at 299,792,458 m/s. They differ in how they meet matter, and the reason is energy per quantum, which Part 6 explains: a quantum of frequency f carries energy hf, so high frequency means a big lump. Radio quanta are too weak to do more than push electrons in an antenna. Microwaves, with the energy of rotation, spin water molecules, which is how a microwave oven warms food. Infrared matches molecular vibrations and is given out by everything at everyday temperatures (see the node 'Blackbody radiation'). Visible quanta can lift an electron between levels in atoms, which drives chemistry, photosynthesis and vision. Ultraviolet quanta can break chemical bonds. X rays strip electrons from inner shells and pass through soft matter (see 'X-rays').

A radio station makes its waves by driving electrons up and down its mast at the broadcast frequency, about 1 MHz for AM and 88 to 108 MHz for FM; see 'Radio waves'.

Data Worked estimate: photon energy from wavelength (energy in eV = 1,240 / wavelength in nm)
BandTypical wavelengthPhoton energyMain effect on matter
FM radio, 100 MHz3 m4 x 10^-7 eV (calculated)drives electrons in an antenna
Microwave oven, 2.45 GHz12.2 cm1 x 10^-5 eV (calculated)turns polar molecules back and forth
Infrared from a warm body10 µm0.12 eV (calculated)sets molecules vibrating
Green light550 nm2.3 eV (calculated)moves electrons between atomic levels
Ultraviolet250 nm5.0 eV (calculated)can break chemical bonds
X ray0.1 nm12,400 eV (calculated)knocks out inner electrons

Calculated from E = hc / wavelength with hc = 1,240 eV nm. Ranges compared with NASA's spectrum pages.

Source: NASA Imagine the Universe, The Electromagnetic Spectrum, https://imagine.gsfc.nasa.gov/science/toolbox/emspectrum1.html (visible light 400 to 700 nm; infrared 1 to 100 microns; X rays 100 eV to 100 keV)

3.3 Reflection follows one rule, equal angles, and a surface gives a mirror image only if its roughness is small compared with the wavelength

Drop a ball on a smooth floor at an angle and it leaves at the same angle. Light does the same on a mirror: the angle of incoming light to the surface's normal (the perpendicular line) equals the angle of the reflected light. There is a deeper reason. Among all paths from a lamp, via the mirror, to your eye, light follows the one that takes least time (Fermat's principle). Reflect the lamp in the mirror and the shortest route is a straight line to its image, which gives equal angles.

The image behind a plane mirror is a virtual image: light seems to come from it, but nothing is there. It lies as far behind the glass as the object stands in front. A curved mirror bends reflected rays together or apart; a parabola sends light from a lamp at its focus out in a parallel beam, as in a torch or headlamp, and gathers parallel sunlight to one hot point, as in solar concentrators.

Whether a surface acts as a mirror depends on the wavelength. A surface whose bumps are much smaller than the wavelength reflects as one smooth sheet. Larger bumps send light off in all directions (diffuse reflection), which is why a matt wall can be seen from anywhere in a room. A microwave oven door shows the reverse. Its metal mesh has holes of a millimetre or two, tiny beside the oven's 12 cm waves, so to them it is a solid mirror. Light, with waves far smaller than the holes, passes out and lets you watch the food.

Sound reflects by the same rule, which is how echoes and the design of concert halls work.

Data Worked estimate: the smallest mirror in which you can see all of yourself
QuantityWorkingResult
Person 1.70 m tall, eyes 1.60 m highTop of the mirror: halfway between eye and top of head, (1.60 m + 1.70 m) / 21.65 m above the floor (calculated)
Bottom of the mirrorHalfway between eye and feet, 1.60 m / 20.80 m above the floor (calculated)
Mirror height needed1.65 m - 0.80 m0.85 m, half your height (calculated)
Does it matter how far away you stand?The image recedes as you do, and the ray geometry scales the sameNo, 0.85 m for any distance

Calculated with the law of reflection and similar triangles.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 8, 'Waves, Sound and Light'
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 8, 'Waves, Sound and Light'

3.4 Whether a material passes, absorbs or reflects light depends on how its electrons respond to that frequency

Glass lets daylight through; wood does not; a polished steel ladle turns it back. The cause is the same in each: light is an oscillating electric field, and it shakes the electrons in matter. What the electrons do depends on whether the light's frequency is near one of their own natural frequencies, as in resonance in Part 2.

In glass, the electrons' natural frequencies lie in the ultraviolet. Visible light is below them, so the electrons are driven gently, hand the energy on without keeping it, and the light passes. The handing on takes a little time, which is why light is slower in glass. Ultraviolet at the resonance is absorbed and warms the glass, so ordinary window glass blocks the shorter ultraviolet. Glass also has vibration resonances in the infrared, so it is opaque to the long-wave infrared that a warmed car interior radiates. That is one reason a closed car in sun gets hot.

Metals have free electrons, which respond to almost any frequency and re-radiate at once in the backward direction. That makes metals opaque and shiny. Copper and gold look reddish or yellow because they absorb blue light more than red. Wood, skin and paper absorb visible light and turn it into thermal energy. Frosted glass is translucent: it passes light but scatters it.

Data Worked estimate: one sunbeam, four materials
MaterialVisible lightUltravioletInfraredWhy
Window glasspassesmostly blocked below about 320 nmlong-wave blockedelectron resonances in the ultraviolet, vibration resonances in the infrared
Polished metalreflectsreflectsreflectsfree electrons answer every frequency
Waterpasses, red slightly absorbedpassesabsorbedmolecule vibrations absorb infrared and, weakly, red
Dry airpassesshort ultraviolet absorbed by ozone high upabsorbed in bands by water vapour and carbon dioxidefew molecular resonances at visible frequencies

Qualitative summary of standard behaviour.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 8, 'Waves, Sound and Light'
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 8, 'Waves, Sound and Light'

See it in the table

H₂O WaterCu CopperSt SteelAu GoldAg Silver

Check your understanding

A radio signal takes about 22 minutes one way to reach Mars at its farthest. What distance is that?

Distance = 299,792 km/s x 1,320 s, about 396 million km, close to the 401 million km at greatest separation.

A photon of green light has 2.3 eV. About how much energy does a 10 µm infrared photon have?

Energy = 1,240 / wavelength in nm = 1,240 / 10,000 = 0.124 eV.

Why does the metal mesh in a microwave oven door keep the microwaves in but let you see the food?

A surface with gaps much smaller than the wavelength reflects as if it were solid. Light's wavelength of about half a micrometre is tiny beside the holes, so light passes through.
← Part 2: Sound: pressure waves, loudness, resonance and moving sourcesMark read · Part 4: Bending light and making colour: refraction, rainbows, blue skies and mixing →