Material Insights · Understanding the Material World

Aircraft engine: Evolution

Timeline

The milestones of the product, each with a source

YearEvent
1950A prototype Dart-powered Vickers Viscount flies the world's first scheduled turboprop airliner services for BEA, experimentally, from 29 July; BEA orders 28 Dart-powered Viscounts on 3 August [54].
1952The de Havilland Comet opens jet airliner service on 2 May with four Ghost jet engines [44].
1953Production Dart-powered Viscounts enter airline service with British European Airways [43].
1955The Rolls-Royce Conway, the first production turbofan, completes its government type test, having first run in 1953; it later powers the Boeing 707-420 and DC-8-40 [42].
1989The IAE V2500, the A320-class engine whose materials this page describes, enters service with Adria Airways [55].
2016The LEAP-1A enters service with a 15% cut in fuel and CO2 on the previous generation [2].
2023The ICAO particulate (nvPM) standard begins to apply to new and in-production engines, adopted in March 2020 [24].
2025CFM delivers a record 1,802 LEAP engines, 28% more than in 2024, as overhaul slots become scarce [6][11].
2026Safran's LEAP overhaul centre in Hyderabad, with a target of 300 shop visits a year, starts to come into service [17].

as of 2026-11-15

Lineage

The products and technologies it evolved from and into

Evolved from
  • CCGT Gas turbines and combined cycle A civil aircraft engine is a gas turbine that gives its output as thrust; the first airline jets and turboprops of the 1950s used this cycle [44][43].
  • Jet Aviation propulsion The twin-class aviation propulsion technology covers piston, jet and propeller engines; the Conway added the bypass fan [42].

as of 2026-11-15

Recipe changes

How what it is made of changed over time, and what drove each change

ChangeFromToDriverSource
Fan bladesMetal fan in the previous generationLEAP: 18 one-piece woven carbon-fibre composite blades and case, with a titanium leading edgeLower weight and better blade aerodynamics, which together give nearly half of the 15% fuel gain[4]
Fan system weightAll-metal fanAbout 1,000 lb lighter on the aircraftLower weight, lower fuel burn[4]
Fan drive in the GTFFan driven directly by the low-pressure turbineA gear system separates the fan from the low-pressure compressor and turbineFan and turbine each run at their best speed, for higher bypass ratio (12.5 to 1)[45][5]
Fuel consumption per generationPrevious generation of single-aisle engines15% less fuel and CO2 (LEAP-1A); 20% less CO2 (GTF family)Lower fuel burn and CO2[2][5]

as of 2026-11-15

What could improve it next

Directions for improvement, today's value and the limit

DirectionMetricTodayLimitUnitSource
Open fan engine without a fan casingFuel efficiency against traditional turbofansNot yet flown; flight demonstration planned for later this decade20 (projected)% better[31]
Higher share of sustainable aviation fuelMaximum sustainable fuel share in a blend50100 (tested in Rolls-Royce engines, not yet permitted for airline flights)% of blend[27][28]
Steady efficiency gains from new aircraft and enginesAnnual reduction in fuel burn of new aircraft1 to 1.5 a year since about 2010Not found in the sources opened% per year[30]
Stricter engine NOx standardICAO NOx standardUnchanged since 2010Stringency process recommended in February 2025year of last update[23]
Longer time between overhaulsOverhaul interval, PW127XT turboprop20,000Not found in the sources openedhours[33]

as of 2026-11-15

Sources

  1. LEAP-1A engine for single-aisle commercial jets Safran
  2. A quantum leap forward (CFM International LEAP engine) Aero Magazine
  3. Pratt & Whitney GTF engine MTU Aero Engines
  4. Safran reports excellent financial performance in 2025 and raises its 2028 ambitions Safran, 2026
  5. Single aisle engine MRO: strategic levers to address supply chain challenges Emerton with IATA, 2026
  6. CFM strengthens LEAP support with the opening of a new MRO shop in India CFM International, 2025
  7. ICAO Environmental Report 2025: NOx standards article International Civil Aviation Organization, 2025
  8. Local air quality: technology standards International Civil Aviation Organization
  9. Sustainable aviation fuel: technical certification (fact sheet 2) International Air Transport Association
  10. Rolls-Royce successfully completes 100% SAF test programme Hydrocarbon Engineering, 2023
  11. Fuel burn of new commercial jet aircraft: 1960 to 2019 (Zheng and Rutherford) International Council on Clean Transportation, 2020
  12. Open fan engine technology aims for epic efficiency GE Aerospace, 2026
  13. ATR powers its aircraft into a sustainable future with the new Pratt & Whitney Canada PW127XT engine AviationPros, 2021
  14. Rolls-Royce Conway RCo.12 Mark 509 turbofan engine Smithsonian National Air and Space Museum
  15. Rolls-Royce Dart turboprop engine Wings of History Air Museum
  16. The Comet's tale Smithsonian Magazine
  17. Performance Extraordinaire (PurePower PW1000G), SPs Airbuz issue 1 SP's Airbuz, 2016
  18. British civil aviation in 1950 (history of aviation timeline) Royal Air Force Museum
  19. History (International Aero Engines) International Aero Engines