Aircraft engine: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Per turbofan for a single-aisle airliner. The only opened material inventory is for the IAE V2500, an earlier-generation A320 engine of the same thrust class in service since 1989 [55]: a 2025 study calculates 1,956 kg against 2,404 kg on its type certificate, leaving out some accessories and systems and the gearbox, and not counting composites or coatings [1]. Shares are calculated from its module table. The LEAP and GTF add composite fan parts. Engine spare parts and nacelles are not yet nodes.
as of 2026-11-15
Components
The products inside one unit, with quantity, mass share and cost share
Variant Turbofan| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Carbon fibre and composite parts | Component | Not given | – |
| The LEAP fan has 18 one-piece woven carbon-fibre blades inside a composite fan case, and the all-composite fan system cuts aircraft weight by 1,000 lb against an all-metal one [4]. The V2500 inventory counts no composites [1]. No mass or cost share of the composite parts was found. | |||
as of 2026-11-15
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant Turbofan| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Ti Titanium | Structural | 983 kg | 50.3% |
| Calculated from the module masses and titanium alloy shares in Table 1 of the V2500 inventory [1]; titanium alloy mass, not pure metal. | |||
| Ni Nickel | Functional | 879 kg | 44.9% |
| Calculated from Table 1 of the V2500 inventory: nickel-base alloys make up most of the hot-section modules and part of the compressor [1]; alloy mass, not pure nickel. | |||
| St Steel | Structural | 65 kg | 3.3% |
| Calculated from Table 1 of the V2500 inventory: steel is a small share of two modules [1]. | |||
| Co Cobalt | Functional | 26 kg | 1.3% |
| Calculated from Table 1 of the V2500 inventory: cobalt-base alloy is a small share of two hot-section modules [1]; alloy mass, not pure cobalt. | |||
as of 2026-11-15
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Life-limited parts of the fan and low-pressure compressor (three parts), share of the LEAP-1A set's list price | 15.2% | Turbofan | 2022 | [3] calculated from USD 0.85 million of 5.58 million |
| Life-limited parts of the low-pressure turbine (eight parts), share of the set's list price | 34.6% | Turbofan | 2022 | [3] calculated from USD 1.93 million |
| Life-limited parts of the high-pressure compressor (seven parts), share of the set's list price | 27.2% | Turbofan | 2022 | [3] calculated from USD 1.52 million |
| Life-limited parts of the high-pressure turbine (five parts), share of the set's list price | 22.9% | Turbofan | 2022 | [3] calculated from USD 1.28 million |
as of 2026-11-15
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Metal parts from suppliers | Specialty alloy suppliers cast and forge the metal parts, which are then machined; in India, HAL has signed a multi-year deal to make ring forgings for the LEAP. | Numerical control machining | [1][19] |
| Composite fan | The fan blades and case are one-piece woven carbon-fibre composite, and each blade gets a titanium leading edge for durability. | Carbon fibre composites | [4] |
| Fuel nozzles | The LEAP's fuel nozzle is made by additive manufacturing. | Additive manufacturing (3D printing) | [4] |
| Modules | In CFM's split, GE builds the core (high-pressure compressor, high-pressure turbine and combustor) and Safran the fan, accessory gearbox and low-pressure compressor and turbine. | – | [46] |
| Final assembly | Safran assembles LEAP-1A engines for Airbus at Villaroche in France, GE's US plants build the LEAP-1B, and MTU in Munich carries out final assembly of one-third of production PW1100G-JM engines for the A320neo. | – | [46][5][47] |
as of 2026-11-15
Technologies used to make it
The technologies used to make it, at which step
Made with- CFR Carbon fibre composites Woven carbon-fibre fan blades and fan case Used in every LEAP fan [4].
- 3DP Additive manufacturing (3D printing) LEAP fuel nozzle CFM was first in the industry to make such a part this way [4].
- CNC Numerical control machining Machining of forged and cast metal parts Machining is one of the steps counted in the V2500 inventory, alongside forging and casting [1].
as of 2026-11-15
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- CCGT Gas turbines and combined cycle 1 gas turbine core Turbofan A turbofan is a gas turbine core with a fan added; the cycle is described in the twin technology node.
- Jet Aviation propulsion 1 propulsion unit Turbofan The engine is the aviation propulsion technology in the form of one unit.
- Ger Gear train 1 fan gear system Turbofan, geared (GTF) The GTF has a gear system between the fan and the low-pressure compressor and turbine [45].
as of 2026-11-15
Sources
- Life Cycle Assessment of Turbofan Engines: A Reverse Engineering Approach (Oestreicher et al.), Procedia CIRP 135 German Aerospace Center (DLR) repository, 2025
- LEAP-1A in-service performance update (Aircraft Commerce, issue 145, December 2022/January 2023) Aircraft Commerce, 2023
- A quantum leap forward (CFM International LEAP engine) Aero Magazine
- Pratt & Whitney GTF engine MTU Aero Engines
- HAL joins LEAP engine supply chain: why is the deal with Safran important for India The Week, 2026
- Performance Extraordinaire (PurePower PW1000G), SPs Airbuz issue 1 SP's Airbuz, 2016
- CFM International at 50: sharing everything, how CFM engines are produced FlightGlobal, 2024
- RTX's Pratt & Whitney and MTU Aero Engines strengthen GTF MRO network collaboration RTX, 2025
- History (International Aero Engines) International Aero Engines