Aircraft engine: Working
What it is
The product and the job it does, in a short paragraph
An aircraft engine, as the trade headings use the term, is a gas turbine that pushes an aircraft forward. This node covers civil turbofans for airliners and turboprops for regional aircraft. The functional unit is one turbofan engine for a single-aisle airliner, in the class of the CFM LEAP-1A [2] or the Pratt & Whitney GTF [5]. Military engines, piston engines and parts sold on their own are left out.
as of 2026-11-15
How it works
How it does its job, step by step in plain words
A large fan at the front, driven by a turbine, pushes most of the incoming air around the engine core; this bypass air gives most of the thrust, and the bypass ratio is about 11 to 1 in the LEAP-1A [3] and 12.5 to 1 in the GTF [5]. The rest of the air is squeezed by a compressor, mixed with fuel and burned, and the hot gas turns the turbines that drive the compressor and the fan. In the GTF a gear separates the fan from the low-pressure compressor and turbine, so each runs at its own best speed [45]. In the LEAP the fan blades and case are one-piece woven carbon-fibre composite [4]. Turboprops use the same core to turn a propeller instead, and suit shorter regional flights.
as of 2026-11-15
Key specifications
The numbers that describe it, each with unit, variant, year and source
| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Take-off thrust rating of the LEAP-1A (A320neo family) | 24,010 to 32,160 | lbf | Turbofan | 2023 | [3] |
| Maximum take-off thrust, LEAP-1A | 35,000 | lbf | Turbofan | – | [2] |
| Bypass ratio, LEAP-1A | 11 | to 1 (about) | Turbofan | 2023 | [3] |
| Bypass ratio, Pratt & Whitney GTF (PW1500G, PW1100G-JM, PW1900G) | 12.5 | to 1 | Turbofan | – | [5] |
| Calculated mass of an IAE V2500 turbofan (A320 class, in service since 1989), against 2,404 kg on its type certificate | 1956 | kg | Turbofan | 2025 | [1][55] |
| Fuel and CO2 reduction against previous-generation engines, LEAP-1A | 15 | % | Turbofan | – | [2] |
| CO2 reduction against the previous generation, GTF family | 20 | % | Turbofan | – | [5] |
| Removal interval target for the LEAP-1A | 25,000 hours or 16,000 cycles | engine flight hours or cycles | Turbofan | 2023 | [3] |
| Overhaul interval of the PW127XT turboprop (40% longer time on wing) | 20,000 | hours | Turboprop | – | [33] |
as of 2026-11-15
Variants
The variants whose make-up or footprint differs a lot, what defines each and its share of units
| Variant | Defining spec | Year | Source |
|---|---|---|---|
| Turbofan | Turbine-driven fan, most air bypassing the core; bypass ratio about 11 to 12.5 to 1; thrust class roughly 14,000 to 35,000 lbf; 1,802 LEAP and 1,055 Pratt & Whitney large turbofans (all types) delivered in 2025 | 2025 | [3][5][2][6][9] No share of all engines sold was found. |
| Turboprop | Turbine turns a propeller through a gearbox; for regional aircraft such as the ATR; the PW100 family powers over 3,300 regional aircraft | – | [34][32] No share of engine units was found. |
as of 2026-11-15
Limits
The physical limits set by science and the engineering limits of today's design, with today's value
| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Bypass ratio reached by production turbofans in the single-aisle class | Engineering | – | 11 (LEAP-1A) to 12.5 (GTF) | to 1 | [3][5] |
| Fuel burn gain from one engine generation to the next (CO2 saved by the GTF over its predecessor) | Engineering | – | 15 to 20 | % | [2][5] |
| Share of fuel heat any heat engine can turn into work: a higher overall pressure ratio raises thermodynamic efficiency but, ICAO notes, also trades fuel burn against NOx | Physical | – | – | – | [23] |
| Time before life-limited parts need replacing, on mature engines (GTF currently 5,000 to 6,000 cycles) | Engineering | – | 15,000 to 20,000 | flight cycles | [11] |
| Share of sustainable aviation fuel allowed in a blend under the ASTM D7566 standard | Engineering | 50 | 50 | % of blend (maximum) | [27] |
as of 2026-11-15
Science it relies on
The science principles it works by or is limited by
Relies on- Newton's laws of motion Thrust is the reaction to air accelerated backwards by the fan and the exhaust.
- Combustion chemistry Burning kerosene in compressed air releases the heat that drives the turbines.
- Carnot's limit on heat engines Like every heat engine, a turbofan's efficiency is bounded by its temperature ratio; ICAO links a higher pressure ratio to higher thermodynamic efficiency [23].
- Fracture mechanics Life-limited parts such as discs and shafts carry a cycle limit and are replaced at fixed intervals [11].
as of 2026-11-15
Sources
- Life Cycle Assessment of Turbofan Engines: A Reverse Engineering Approach (Oestreicher et al.), Procedia CIRP 135 German Aerospace Center (DLR) repository, 2025
- LEAP-1A engine for single-aisle commercial jets Safran
- LEAP-1A in-service performance update (Aircraft Commerce, issue 145, December 2022/January 2023) Aircraft Commerce, 2023
- A quantum leap forward (CFM International LEAP engine) Aero Magazine
- Pratt & Whitney GTF engine MTU Aero Engines
- Safran reports excellent financial performance in 2025 and raises its 2028 ambitions Safran, 2026
- Pratt & Whitney's GTF deliveries increased 6% in 2025, while recall recovery progresses FlightGlobal
- Single aisle engine MRO: strategic levers to address supply chain challenges Emerton with IATA, 2026
- ICAO Environmental Report 2025: NOx standards article International Civil Aviation Organization, 2025
- Sustainable aviation fuel: technical certification (fact sheet 2) International Air Transport Association
- Performance that sets new standards (PW127XT engine) ATR
- ATR powers its aircraft into a sustainable future with the new Pratt & Whitney Canada PW127XT engine AviationPros, 2021
- Regional aviation Pratt & Whitney
- Performance Extraordinaire (PurePower PW1000G), SPs Airbuz issue 1 SP's Airbuz, 2016
- History (International Aero Engines) International Aero Engines