Material Insights · Understanding the Material World

Carbon fibre and composite parts

Light, strong parts made of carbon fibre set in resin.

Parts and semi-finished goods · No. 84

  • Electronic age
Parts and semi-finished goods · Product

Wind blades, not aircraft, took 44.5% of the world's carbon fibre in 2025, but aerospace and defence earned 44.1% of the revenue.

Chart: Illustration: Carbon fibre and composite parts

Where it comes from

Chart: Map of where it comes from

Akio Shindo filed his patent for PAN carbon fibre on 7 September 1959 at a government institute in Osaka. Toray began commercial production in 1971 and launched carbon fibre golf shafts in 1973.

Three things to know
  1. ATA's report puts 2025 world carbon fibre demand at 224,510 tonnes, up 43.8%; Composites United, estimating from production capacity and its use, puts it at about 148,500 tonnes.
  2. A review of published studies finds a median of 31 kg CO2e and 562 MJ of energy to make 1 kg of carbon fibre, with wide ranges.
  3. In a typical offshore wind blade, carbon fibre in the spar cap is about 12% of the mass but about 50% of the lifetime carbon footprint.
The journey
  1. 1 PrecursorPolyacrylonitrile (PAN) is made, spun and stretched into fibre
  2. 2 StabiliseThe fibre is heated in air
  3. 3 CarboniseIt is baked without oxygen until mostly carbon is left
  4. 4 Treat and sizeThe surface is treated and coated so that resin sticks
  5. 5 Lay up and cureFibre is set in resin as prepreg, wound fibre or pultruded plate, then cured
  6. 6 End of lifeMuch composite waste is landfilled or burned; recovery is small
Covered in Structures and materials: stress, stiffness, strength and why things breakEngineeringCost, trade-offs and resources: why the best design is rarely the strongestEngineering
Go deeper pick a tab to open it in full