Carbon fibre and composite parts: Working
What it is
The product and the job it does, in a short paragraph
Carbon fibre and composite parts are thin carbon fibres set in a resin, usually epoxy, to make parts that are stiff, strong and light. The functional unit is one kilogram of finished composite part. The scope is civil parts for aircraft structures, wind blades, cars, pressure vessels and sport. Defence uses are covered only as export-control policy. [3, 9]
as of 2026-11-13
How it works
How it does its job, step by step in plain words
Most carbon fibre starts as polyacrylonitrile (PAN), an acrylic plastic that is made, spun, stretched and finished into fibre [3]. The fibre is heated in air to stabilise it, then baked without oxygen so that mostly carbon is left [3]. Its surface is treated and sized, given a thin coating, so that resin bonds to it [3]. The fibre is then woven, wound or made into prepreg, fibre soaked in resin in advance. Wind blade spar caps, the long beams inside a blade, use pultruded plate, a strip of fibre and resin pulled through a die [10]. Parts are cured, for example in an autoclave, a heated pressure oven [5]. The fibre carries the load along its length and the resin holds the fibres in place.
as of 2026-11-13
Limits
The physical limits set by science and the engineering limits of today's design, with today's value
| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Emissions to make 1 kg of carbon fibre: lowest published value against the median (a benchmark, not a physical limit) | Engineering | 17 | 31 | kg CO2e per kg of fibre (not per kg of part) | [3] |
as of 2026-11-13. Strength and stiffness limits of fibre grades are left out under the dual-use rule for this product, as for the twin technology.
Science it relies on
The science principles it works by or is limited by
Relies on- Macromolecules (polymer theory) The fibre is made by baking a long-chain polymer, PAN, and the resin is a polymer.
- Hooke's law of elasticity Carbon fibre is chosen for its high stiffness against its weight.
- Fracture mechanics Cracks between layers and hidden impact damage limit how far a part can be loaded.
as of 2026-11-13
Sources
- A critical review and meta-analysis of energy demand, carbon footprint, and other environmental impacts from carbon fiber manufacturing Resources, Conservation & Recycling, vol. 219, 108302 (Chen, Liddell, Ogale, Miao, Ijeoma, Carbajales-Dale), 2025
- Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres University of Nottingham repository, accepted manuscript; published in Composites Part A, vol. 100, pp. 206 to 214 (Meng, McKechnie, Turner, Pickering), 2017
- Boeing sets pace for composite usage in large civil aircraft CompositesWorld
- Wind blade spar caps: Pultruded to perfection? CompositesWorld (Michael LeGault), 2018