Carbon fibre and composite parts: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
A finished part is carbon fibre held in a resin, usually epoxy. No opened source gives the fibre and resin shares of a typical part across uses, and the make-up of particular fibre grades is left out under the dual-use rule, so no material amounts are given. Most commercial fibre is made from PAN, which comes from acrylonitrile [3]. Carbon fibre itself, prepreg and fabric are not yet nodes.
as of 2026-11-13
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the precursor | PAN is polymerised, spun, stretched and finished into fibre | – | [3] |
| Stabilise | The PAN fibre is heated in air so that it will not melt later | Carbon fibre composites | [3] |
| Carbonise | The fibre is baked without oxygen to drive off the elements other than carbon | Carbon fibre composites | [3] |
| Treat and size | Surface treatment and a thin coating (sizing) help the resin bond | – | [3] |
| Make prepreg, fabric or plate | Fibre is woven, wound or made into prepreg; for wind spar caps it is pultruded into plate | – | [10] |
| Mould and cure | The part is formed and cured, for example by autoclave moulding | Carbon fibre composites | [5] |
as of 2026-11-13
Technologies used to make it
The technologies used to make it, at which step
Made with- CFR Carbon fibre composites Fibre making and composite layup The twin technology page covers the fibre process and the laying-up of parts.
as of 2026-11-13
Sources
- A critical review and meta-analysis of energy demand, carbon footprint, and other environmental impacts from carbon fiber manufacturing Resources, Conservation & Recycling, vol. 219, 108302 (Chen, Liddell, Ogale, Miao, Ijeoma, Carbajales-Dale), 2025
- Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres University of Nottingham repository, accepted manuscript; published in Composites Part A, vol. 100, pp. 206 to 214 (Meng, McKechnie, Turner, Pickering), 2017
- Wind blade spar caps: Pultruded to perfection? CompositesWorld (Michael LeGault), 2018