Material Insights · Understanding the Material World

Centrifugal water pump: Working

What it is

The product and the job it does, in a short paragraph

A centrifugal water pump lifts and pushes water by spinning an impeller, a vaned wheel, inside a casing. This file covers other centrifugal pumps, mainly for water (HS 8413.70). The functional unit is one 5 hp (3.7 kW) farm water pump set, pump and motor together [4]. Three variants are followed: the submersible borewell pump set, the surface monoblock pump set and the solar pump set. Sewage, slurry and process pumps are left out, as are trade figures.

as of 2026-11-16

How it works

How it does its job, step by step in plain words

The electric motor turns a shaft at about 2,900 revolutions a minute on 50 Hz supply [4]. The shaft turns an impeller whose curved vanes throw water outwards from the centre, giving it speed. The casing slows that fast water, which turns speed into pressure and pushes it up the pipe. A borewell set stacks several impellers, called stages, so that each adds pressure; a 12-stage 5 hp model is listed [5]. In a submersible set the motor is under the water and the pump pushes water up. A surface set stands above ground and sucks water in, but the lift is limited to 10.33 m in theory and about 8 m in practice [26]. A solar set feeds a submersible pump from a panel array instead of the grid, a 4.8 kWp array for 5 hp in one maker's range [13].

as of 2026-11-16

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Rated power of the functional unit3.7kW (5 hp)Submersible borewell pump set (Havells H6W4M1F50T, 66.7 kg)2026[4]
Net weight of a 5 hp three-phase water-filled borewell set (Havells H6W4M1F50T, maker's page)66.7kgSubmersible borewell pump set (Havells H6W4M1F50T, 66.7 kg)2026[4]
Maximum head and maximum flow of the Havells 5 hp set: 39 m and 700 litres a minute39m of head (flow up to 700 L/min)Submersible borewell pump set (Havells H6W4M1F50T, 66.7 kg)2026[4]
Product weight of the EU borehole multistage submersible base case BC13 (up to 6 inch), pump with motor; power not stated28.9kgSubmersible borewell pump set (EU base case BC13, 28.9 kg, not a 5 hp set)2018[1]
Product weight of the EU end-suction own-bearing base case BC1 (up to 22 kW), the nearest to a surface set52.9kgSurface monoblock pump set (EU base case BC1, 52.9 kg, not a 5 hp set)2018[1]
Solar array paired with a 5 hp (3.70 kW) AC submersible solar pump (Lubi LSZ-A050 models)4.8kWp of panelsSolar pump set (submersible pump end; array is a separate component)– [13]
Average electricity use of an electric farm pump in Maharashtra (calculated: 15,765 million kWh over 34.9 lakh pump sets)4517kWh per year– 2011[6]
Economic lifetime in service assumed for EU clean-water pumps10years– 2018[1]

as of 2026-11-16. The 5 hp mass is from a maker's own page (Havells); no Kirloskar, CRI or Shakti data sheet opened gave a mass. The EU base cases are smaller pumps than a 5 hp set and are used for the bill of materials, unscaled, because no Indian inventory was found.

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specShareYearSource
Submersible borewell pump setMultistage pump and water-filled motor lowered into a borewell; 72% of the Indian agricultural pump market by value in 2011722011[3]
Surface monoblock pump setPump and motor on one shaft above ground, drawing water by suction; 28% of the market by value in 2011282011[3]
Solar pump setA submersible borewell pump fed from a panel array, not the grid: 4.8 kWp for 5 hp in one range [13]; 975,227 standalone solar pumps installed under PM-KUSUM by 31 December 2025 [10]; no share of units sold found– 2025[13][10]

as of 2026-11-16

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Theoretical maximum suction lift of a surface pump at sea levelPhysical10.338m (about 8 m in practice)[26]
EU minimum efficiency index for clean-water pumps in force since 2015, against the benchmark for the most efficient pumpsEngineering0.70.4MEI (dimensionless)[9]
Wire-to-water efficiency of Indian farm pump sets, commonly estimated below this levelEngineering– 40% (below)[27]
BEE 5 star band: performance factor, the relative improvement of overall pump set efficiencyEngineering1.4– performance factor (at least)[7]

as of 2026-11-16

Science it relies on

The science principles it works by or is limited by

Relies on Limited by

as of 2026-11-16

Sources

  1. Ecodesign Pump Review: final report (Task 1 to 7, base cases and life-cycle costs) Ecodesign pump review study team for the European Commission (copy hosted by the Swedish Energy Agency), 2018
  2. Market Research of Agriculture Pump-sets Industry of India Shakti Sustainable Energy Foundation (supported study), 2012
  3. H6W4M1F50T Borewell Submersible Pump (3.70 kW, 5 HP) Havells India (Lloyd), 2026
  4. Kirloskar KS4H-5012 5 HP 3.7 kW 50 mm borewell water filled submersible pump Moglix (listing of a Kirloskar Brothers pump), 2026
  5. Understanding the Electricity, Water, Agriculture Linkages, Volume 1 Prayas (Energy Group), 2018
  6. Schedule 7: Pump Sets (Revision 4), energy labelling scheme Bureau of Energy Efficiency, India, 2020
  7. Commission Regulation (EU) No 547/2012 on ecodesign requirements for water pumps (revised version) legislation.gov.uk, 2017
  8. PM-KUSUM boosts solar agriculture: over 21 lakh farmers benefit across India SolarQuarter, 2026
  9. LSZ AC Solar Stainless Steel Submersible Bore well Pumps (catalogue) Lubi Electronics
  10. Geodetic suction lift KSB centrifugal pump lexicon
  11. Agriculture Sector Ashoka Centre for a People-centric Energy Transition (ACPET), Ashoka University