Centrifugal water pump
A pump with a spinning impeller that lifts water from wells, rivers and pipes.
Farm equipment and inputs · No. 61
- Steam and steel
Under 1% of a borewell pump's life-cycle emissions come from making it; the electricity it runs on causes over 99%.
Chart: Illustration: Centrifugal water pump
Where it comes from
Chart: Map of where it comes from
Denis Papin built a centrifugal pump with straight vanes in 1687. Gwynne's firm was founded in 1849 to make centrifugal pumps, and Gwynne's and Appold's pumps were shown at the Great Exhibition of 1851. Armais Arutunoff invented the submersible pump in Russia in 1916.
Three things to know
- A maker lists its 5 hp (3.7 kW) borewell set at 66.7 kg, more than twice the 28.9 kg EU borehole pump base case.
- Over a ten-year life, the electricity for the 28.9 kg EU borehole base case costs EUR 5,182 against a product price of EUR 1,911, about 2.7 times as much (calculated).
- India has about 19 million agricultural pumpsets, and the BEE 5 star label asks for a performance factor of at least 1.40.
The journey
- 1 Cast iron and steelCasings, bowls and shafts; the 52.9 kg EU end-suction base case holds 32.7 kg of cast iron
- 2 Stainless steelImpellers, diffusers and shafts of borewell sets; 8.7 kg in the 28.9 kg EU borehole base case
- 3 Copper windingMotor windings: 2.15 kg of copper wire in the 28.9 kg EU borehole base case
- 4 MakingParts cast and machined, motors wound, every product tested before it ships
- 5 UseAbout 4,517 kWh a year for an average electric farm pump in Maharashtra (calculated, 2011), over a life of about ten years
- 6 End of lifeThe EU model assumes 70% of steel, iron and aluminium and 60% of copper wire are recycled
Try this in What if Switch on levers and see what changes in India by 2036.
Covered in What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineeringThinking in estimates: units, scaling and educated guessingEngineeringFluids: pressure, flow, lift and dragEngineering