Cotton T-shirt: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Amounts are for a 215 g shirt, scaled from the Cotton Incorporated global-average inventory per 1,000 kg of garment (data 2010 to 2015, report of 2017) [1]. Conventional and organic cotton shirts differ in farm inputs and water [11]; the blend swaps 40% of the weight for polyester [12]. Components that are not yet nodes: cotton yarn and knitted fabric, listed in new_products, and sewing thread, which the studies give no amount for. Labels, buttons and prints are not in the study.
as of 2026-11-16
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Conventional cotton| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| H₂O Water | Consumable | 0.812 m3 | – | – |
| Blue (irrigation) water on the farm: about 2,235 m3 per 1,000 kg of fibre x 0.363 kg of fibre (calculated) [1]. | ||||
| Ct Cotton | Structural | 0.363 kg | 100% | 0% |
| Cotton fibre in: 1,690 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]. The finished shirt is all cotton by mass; the rest is comber noil, short fibre and cutting waste. | ||||
| NaCl Salt | Consumable | 0.138 kg | – | – |
| Rock salt for the dye bath, 642 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]. | ||||
| N Nitrogen (ammonia) | Consumable | 0.055 kgrange 0.045 to 0.06 kg | – | – |
| Nitrogen fertiliser on Indian cotton: regional rates of 84.5, 79.5 and 95.6 kg N per hectare over fibre yields of 677, 489 and 578 kg per hectare, x 0.363 kg of fibre; the amount is the mean of the three regions (calculated, assuming the table columns match) [1]. US rates are 77 to 172 kg per hectare [1]. Pesticide quantities per hectare are not given in the study. | ||||
| H₂O Water | Consumable | 0.048 m3 | – | – |
| Wet processing water (desalinated): preparation 72,600 kg, dyeing 129,000 kg and finishing 19,300 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]; 8,480 kg of tap water in dyeing is not added. | ||||
| Dye Dyes | Functional | 0.036 kg | – | – |
| Reactive dye alone: 166 kg in the batch-dyeing step of the T-shirt inventory, per 1,000 kg of finished T-shirts, x 0.215 kg (calculated) [1]. The step dyes 1,290 kg of prepared fabric into 1,190 kg of dyed fabric, so the dose is about 13% of the fabric weight (calculated) [1]. Salt (642 kg), soda ash (92.8 kg) and other auxiliaries are separate rows of the same table and are not in this figure. The dose is high for a single shade and is the study's global average, not checked elsewhere. | ||||
| NaOH Caustic soda | Consumable | 0.022 kg | – | – |
| Preparation 35.2 kg plus dyeing 68.5 kg per 1,000 kg of garment (100% basis) x 0.215 kg (calculated) [1]. | ||||
| Sda Soda ash | Consumable | 0.02 kg | – | – |
| Sodium carbonate in dyeing, 92.8 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]. | ||||
| H2O2 Hydrogen peroxide | Consumable | 0.009 kg | – | – |
| Bleaching, 40.1 kg of 50% solution per 1,000 kg of garment x 0.215 kg (calculated; about 0.0043 kg as pure peroxide) [1]. | ||||
| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| Ct Cotton | Structural | 0.363 kg | 100% | 0% |
| Same fibre input as the conventional shirt, assumed (calculated); no organic-specific yarn losses were found. | ||||
| NaCl Salt | Consumable | 0.138 kg | – | – |
| Rock salt for the dye bath, 642 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]. Wet processing is assumed to match the conventional shirt. | ||||
| H₂O Water | Consumable | 0.066 m3 | – | – |
| Blue water on the farm: 182 m3 per 1,000 kg of organic lint x 0.363 kg (calculated) [11]. Synthetic nitrogen fertiliser is not listed for this variant because no source gives its organic inputs. | ||||
| H₂O Water | Consumable | 0.048 m3 | – | – |
| Wet processing water (desalinated): preparation 72,600 kg, dyeing 129,000 kg and finishing 19,300 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]; 8,480 kg of tap water in dyeing is not added. Wet processing is assumed to match the conventional shirt. | ||||
| Dye Dyes | Functional | 0.036 kg | – | – |
| Reactive dye alone: 166 kg in the batch-dyeing step of the T-shirt inventory, per 1,000 kg of finished T-shirts, x 0.215 kg (calculated) [1]. The step dyes 1,290 kg of prepared fabric into 1,190 kg of dyed fabric, so the dose is about 13% of the fabric weight (calculated) [1]. Salt (642 kg), soda ash (92.8 kg) and other auxiliaries are separate rows of the same table and are not in this figure. The dose is high for a single shade and is the study's global average, not checked elsewhere. Wet processing is assumed to match the conventional shirt. | ||||
| NaOH Caustic soda | Consumable | 0.022 kg | – | – |
| Preparation 35.2 kg plus dyeing 68.5 kg per 1,000 kg of garment (100% basis) x 0.215 kg (calculated) [1]. Wet processing is assumed to match the conventional shirt. | ||||
| Sda Soda ash | Consumable | 0.02 kg | – | – |
| Sodium carbonate in dyeing, 92.8 kg per 1,000 kg of garment x 0.215 kg (calculated) [1]. Wet processing is assumed to match the conventional shirt. | ||||
| H2O2 Hydrogen peroxide | Consumable | 0.009 kg | – | – |
| Bleaching, 40.1 kg of 50% solution per 1,000 kg of garment x 0.215 kg (calculated; about 0.0043 kg as pure peroxide) [1]. Wet processing is assumed to match the conventional shirt. | ||||
| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| Ct Cotton | Structural | 0.218 kg | 60% | 0% |
| 60% of 0.215 kg, scaled by the conventional shirt's 1.69 kg of fibre per kg of garment (calculated; the blend's own losses were not found) [12][1]. | ||||
| PSF Polyester fibre | Structural | 0.086 kg | 40% | 0% |
| 40% of 0.215 kg of garment (calculated) [12]; processing losses for polyester were not found. The Danish study's second blend uses recycled polyester for the same 40% [12]. | ||||
Indicative · as of 2026-11-16. Amounts are per 215 g shirt, scaled from the per-1,000 kg T-shirt inventory (Table 7-3) of the 2017 global-average study (calculated) [1]. The table lists fibre, farm inputs and wet-processing chemicals; the T-shirt has no component with its own node. Dye, salt and soda ash are the study's figures and are not checked against other sources.
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Year | Source |
|---|---|---|---|
| Retailers (store profit, staff, rent and sales tax) | 60% | 2025 | [10] |
| Brand profit | 12% | 2025 | [10] |
| Materials (fibre, yarn and fabric) | 12% | 2025 | [10] |
| Transport | 8% | 2025 | [10] |
| Factory workers (less than 1%; shown as 1) | 1% | 2025 | [10] |
as of 2026-11-16
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Grow and gin the cotton | Farmers grow cotton with seed, irrigation or rain, fertiliser and pest control; Bt hybrids cover over 90% of Indian cotton area [6]. A gin separates lint from seed. | Cotton gin | [1][6] |
| Spin the yarn | Opening, carding and combing, then spinning. Per 1,000 kg of garment, 1,690 kg of fibre gives 1,330 kg of yarn and 333 kg of comber noil [1]. | Mechanised spinning | [1] |
| Knit the fabric | Circular knitting machines loop the yarn into greige (unfinished) jersey: 1,330 kg of yarn gives 1,310 kg of fabric [1]. | Knitting frame | [1] |
| Bleach, dye and finish | Bleaching with hydrogen peroxide and caustic soda, batch dyeing with reactive dye, salt and soda ash, then finishing and compaction [1]. | Synthetic dyes | [1] |
| Cut and sew | Panels are cut, losing about 15% of the fabric, and sewn; the study's cut-and-sew table counts 4,444 shirts of 225 g in 1,000 kg [1]. | Sewing machine | [1] |
| Ship to the buyer | The global-average study assumes 12,270 km from fibre production to fabric and 9,530 km from cut-and-sew to the consumer [1]. | – | [1] |
as of 2026-11-16
Technologies used to make it
The technologies used to make it, at which step
Made with 5- Gin Cotton gin Separating lint from seed · 100% share Cotton fibre reaches the mill as ginned lint [1].
- Spn Mechanised spinning Spinning lint into yarn Yarn production takes 15,500 MJ of electricity per 1,000 kg of garment, the largest energy step [1]. Ring and rotor spinning have different energy use (7,280 and 5,289 MJ per 1,000 kg in the machinery data) [1].
- Knt Knitting frame Knitting the jersey · 100% share A T-shirt of HS 6109 is knitted by definition.
- Dye Synthetic dyes Reactive dyeing of the fabric Reactive dyes bond to cotton through a covalent bond; they came on the market in 1956 [17].
- SwM Sewing machine Cut and sew · 100% share Cut-and-sew takes 375 MJ of electricity per 1,000 kg of garment [1].
as of 2026-11-16
Sources
- LCA Update of Cotton Fiber and Fabric Life Cycle Inventory thinkstep AG for Cotton Incorporated, 2017
- Present status of GM crops in India Singh, Arunachalam and Mohapatra, Indian Farming 70(05), ICAR, 2020
- Workers Receive Less Than 1% of the Price of a T-Shirt (chart, estimates from the Clean Clothes Campaign) Statista
- The Life Cycle Assessment of Organic Cotton Fiber Textile Exchange, 2014
- Life Cycle Assessment of 5 T-shirts Tænketanken Tekstilrevolutionen for ID Identity, 2023
- Dye: dyeing techniques Encyclopaedia Britannica, 2025