Material Insights · Understanding the Material World

CT scanner

A machine that builds cross-section images of the body from X-rays.

Health products · No. 72

  • Electronic age
Health products · Product

Siemens declares that the use phase makes up about 89% of the life-cycle greenhouse gases of one photon-counting CT scanner.

Chart: Illustration: CT scanner

Where it comes from

Chart: Map of where it comes from

EMI's scanner imaged its first patient in London on 1 October 1971. Hounsfield came back from a New York course in May 1972 with 12 orders, the first commercial unit was installed at the Mayo Clinic in June 1973, and photon-counting CT reached the market after FDA clearance in 2021.

Three things to know
  1. The first patient scan was made on 1 October 1971, EMI took its first orders in May 1972, and the first commercial EMI scanner was installed in June 1973.
  2. Siemens cut the gadolinium oxide supplied per area of detector ceramic by 82% between 2000/2001 and 2018/2019, and about 25% of what it processes now comes from a closed recycling loop.
  3. The use phase is about 89% of the declared life-cycle greenhouse gases for the photon-counting scanner and about 77% for the conventional one (both calculated).
The journey
  1. 1 MaterialsSteel and other ferrous alloys are about half of the weight; conventional detectors use a gadolinium ceramic, the first photon-counting scanner cadmium telluride, and tubes use tungsten
  2. 2 MakingA few firms lead; in India, Siemens Healthineers (Bengaluru, 2019) and Wipro GE (2022) make scanners locally
  3. 3 LicensingIndia's regulator licenses only type-approved equipment; the US sets CT performance rules for systems built since 1985
  4. 4 UseUnder Siemens' standard scenario the use phase gives 61,774 kg CO2e for one scanner, against 21,047 kg for making it
  5. 5 End of lifeMakers declare 98% to 99% of the weight recyclable, refurbish X-ray tubes and recycle gadolinium oxide
Go deeper pick a tab to open it in full