Material Insights · Understanding the Material World

Electrolyser: Interventions

Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

LeverLife stageChangeEffect per unitReadinessAdoptionWho actsSource
DesignComponents designCut iridium and platinum per kW in PEM stacksFrom 0.8 g per kW today to 0.03 g per kW at the DOE ultimate target, a 96% cut (calculated)Research target; 2022 status is 0.8 g per kWNot yet at targetStack makers, catalyst suppliers, research programmes[5]
Change routeComponents designChoose alkaline cells, which use nickel and need no iridium, where steady power suits themRemoves the 0.75 kg of iridium per MW of PEM; adds about 2,170 kg of nickel per MW (calculated)Deployed; alkaline is 44% of operational European manufacturing capacityAlkaline is the cheapest per kW in IRENA's 2020 rangesProject developers and makers[6][8][13]
CircularityEnd of lifeRecycle stack and plant materials back into new electrolysersAbout 50% lower climate impact of the plant from recycled against primary materials; 77% of the system mass can be recycled or reusedStudied for Germany; a recycling industry is not yet in placeNot foundMakers, recyclers, regulators[8]
EfficiencyUseLower the electricity used per kg of hydrogenFrom 55 to 46 kWh per kg for a PEM system at the ultimate DOE target, a 16% cut (calculated)Research target2022 status 55 kWh per kgStack and rectifier makers[5]
DesignMakingMake stacks last longer, so fewer replacement stacks are builtStack life from 40,000 to 80,000 hours at the DOE target would halve stack builds per operating hour (calculated)Research target40,000 hours in the 2022 status; stacks replaced after about 10 years in a 100 MW projectStack makers[5][12]

as of 2026-11-13

Sources

  1. Technical Targets for Proton Exchange Membrane Electrolysis US Department of Energy, Hydrogen and Fuel Cell Technologies Office, 2023
  2. Green Hydrogen Cost Reduction: Scaling up Electrolysers to Meet the 1.5°C Climate Goal International Renewable Energy Agency, 2020, Table ES1 and Table 1; copy hosted by FGV Energia
  3. Reducing Environmental Impacts of Water Electrolysis Systems by Reuse and Recycling: Life Cycle Assessment of a 5 MW Alkaline Water Electrolysis Plant Energies 18(4), 796, MDPI (Annika C. Hoppe and Christine Minke), 2025, Table 2
  4. Deliverable 9.4, GHG emissions avoidance analysis report (pre-construction) TECNALIA for the REFHYNE 2 project, 2025, Sections 5.1 to 5.3; dated March 2025
  5. Electrolyser manufacturing: Where does Europe stand? Hydrogen Europe, 2025