Flexible plastic packaging film: Interventions
Try this in What if Switch on levers and see what changes in India by 2036.
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Circularity | End of life | Collect and recycle post-consumer film into new film | Blending 30% recycled flexible plastic into LDPE film cuts 2,338 kg CO2e per tonne to 1,801 kg, a 23% fall, in a US model [2] | modelled for a US single-stream collection; recycling of film is rare | 3 to 8% of US post-consumer film recycled in 2021 [6] | Municipalities, recyclers, brand owners and film makers | [2][6] |
| Circularity | Making | Use 30% recyclate in BOPP film | Total CO2 falls 20%, from 2.744 to 2.193 kg per kg of film [4] | assessed with data from a running plant | Not found | Film makers | [4] |
| Design | Components design | Use EVOH instead of polyamide 6 as the barrier layer | EVOH has 35% lower energy and 74% lower GHG impact than PA 6 [7] | assessed in a life-cycle study | Not found | Film designers and converters | [7] |
| Substitute | Components design | Switch to coated paper-based packaging with the same barrier | 34 to 62% lower GHGs than plastic multilayer films in a cradle-to-grave LCA [7] | assessed in a life-cycle study | Not found | Brand owners and packaging designers | [7] |
| Design | Components design | Design films to be readily recycled | At most 40% of US flexible packaging could readily be recycled mechanically; design for recycling raises that ceiling [6] | deployed in rules, in progress in industry | At most 40% of US flexible packaging readily recyclable [6] | Brand owners, film makers and regulators | [6] |
| Efficiency | Making | Use a small extruder built for sensitive polymers for the EVOH layer instead of a standard one | Cuts the specific energy input for EVOH from 250 to 200 Wh per kg at the same maximum throughput, 20% (calculated) [25] | deployed (maker's figure) | Not found | Film makers | [25] |
| Electrify | Making | Run the packaging process on wind power instead of the national mix | Potential damage to human health falls 91%, to ecosystems 89%, to resources 92% in a Polish study of shrink-packing bottles in LDPE film with 50% recyclate [27] | assessed in a life-cycle study | Not found | Film makers and power buyers | [27] |
| Business model | End of life | Extended producer responsibility with recycled-content targets | Sets 10% recycled content for flexible packaging in India for 2025 to 2027 and 20% after that [18] | deployed | In force in India [18] | Producers, importers and brand owners; regulators | [18] |
as of 2026-11-17
Sources
- Economic and environmental feasibility of recycling flexible plastic packaging from single stream collection (INL/JOU-21-64510) Idaho National Laboratory for the US Department of Energy, 2023
- The use of recyclates reduces the carbon footprint of films the most Sustainable Packaging News (study by Brückner Maschinenbau and envistra), 2023
- Addressing Favorable and Challenging Flexible Plastic Packaging Waste Flows: A Material Flow Analysis Journal of Advanced Manufacturing and Processing 7(3), e70014 (Makarova and others, MIT), 2025
- A cradle-to-grave life cycle assessment of multilayer plastic film food packaging materials, comparing to a paper-based alternative Waste Management 200, 114747 (Mousania and Atkinson), 2025
- India tightens plastic waste rules to boost recycling and reuse Packaging Insights, 2026
- Energy-efficient extrusion: How can we lower energy costs? SML Maschinengesellschaft, 2023
- Analysis of the Impact of the Post-Consumer Film Waste Scenario and the Source of Electricity on the Harmfulness of the Mass Packaging Process Polymers 16(24), 3467 (Walichnowska and others), 2024