Material Insights · Understanding the Material World

Footwear: Working

What it is

The product and the job it does, in a short paragraph

Footwear is any article with an applied sole that protects or covers the foot: shoes, boots, sandals and slippers [11]. The functional unit is one pair of shoes, which weighs about 350 g for open-toed shoes, 900 g for closed-toed shoes and 1,100 g for boots in the EU reference products [4]. The scope is HS 6402, 6403 and 6404: footwear with uppers of rubber or plastics, leather or textile. Trade figures add the three codes. Other footwear headings, parts and second-hand shoes are left out.

as of 2026-11-16

How it works

How it does its job, step by step in plain words

A shoe has two jobs: grip and cushion underfoot, and hold the foot in place. The outsole, usually rubber or a polymer such as polyurethane, grips the ground. A midsole of foam, often EVA (a copolymer of ethylene and vinyl acetate), cushions the foot. The upper, made of leather, textile or moulded plastic, wraps the foot and is closed with laces, straps or elastic. To build a running shoe, the factory cuts and stitches the 53 parts of the upper, injection moulds several sole pieces, then glues and presses upper and sole together [1]. The EU reference assumes 50 uses for open-toed shoes and 100 for closed-toed shoes and boots [4].

as of 2026-11-16

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Mass of one pair, open-toed shoes (EU reference product)350g per pairSandal2025[4]
Mass of one pair, closed-toed shoes of all materials (EU reference product)900g per pair– 2025[4]
Mass of one pair, boots (EU reference product)1100g per pair– 2025[4]
Mass of upper and sole of a men's size 9 running shoe pair (excluding packaging)674g per pairRunning shoe2010[1]
Mass of the Bangladesh reference leather shoe without its paper (791 g, calculated from the study's materials table)791g per pairLeather shoe2019[6]
Discrete parts in one running shoe65partsRunning shoe2010[1]
Processing steps to assemble one running shoe360stepsRunning shoe2010[1]
Mass of one EVA outsole, US size 8 (one shoe, not a pair)191.98g– 2023[22]
Adhesive used in a pair of leather shoes168g per pairLeather shoe2024[23]

as of 2026-11-16. Only the pair masses are used for the bill of materials. The Bangladesh paper lists 372 g of paper among the 1,163 g of materials; the paper is packaging and is left out of the 791 g [6].

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Leather shoeLeather upper and lining, mostly chrome tanned; polyurethane sole glued on; about 790 g a pair without packaging (Bangladesh reference shoe)2019[6]
Running shoeSynthetic upper of polyester and polyurethane, olefin copolymer (EVA type) midsole, diene rubber outsole; 674 g a pair (size 9 men's shoe made in China)2010[1]
SandalOpen-toed footwear; the EU reference pair weighs 350 g and is 28% EVA, 32% natural and synthetic rubber, 6% PVC and 8% polyurethane; the chappal and hawai slipper belong here2025[4]

as of 2026-11-16. No source gives the share of pairs sold by variant. One Indian maker, Relaxo, says 80% of its sales are open footwear [29]; the figure is for that company only.

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Share of the chromium offered in tanning that the leather takes up (UNIDO: achievable with better methods against the older standard)Engineering9870%[8]
Chromium offered per tonne of raw hide (UNIDO: can fall from the standard offer to the lower figure)Engineering1015 to 18kg Cr2O3 per tonne of raw hide[8]
Tannery effluent per tonne of raw hide (UNIDO: can fall to the lower figure)Engineering1234 to 56m3 per tonne of raw hide[8]
Recovered EVA scrap blended into new outsoles (the share tested in the recycled-EVA study)Engineering10– % by weight[22]

as of 2026-11-16. These are tanning and material limits of today's methods. No physical limit specific to footwear was found. The UNIDO figures are from 2000 and show what the study judged possible then.

Science it relies on

The science principles it works by or is limited by

Relies on
  • Macromolecules (polymer theory) Rubber, EVA, polyurethane and PVC are long-chain polymers; chain length and cross-links set how soft, springy and hard-wearing a sole is.
  • Surface chemistry and adsorption Soles are held to uppers by adhesive; the bond depends on how well the glue wets and sticks to each surface.
  • Hooke's law of elasticity A foam midsole behaves as a spring: it compresses under load and returns energy, which is the cushioning the wearer feels.

as of 2026-11-16

Sources

  1. Manufacturing-focused emissions reductions in footwear production (authors' working paper of Cheah et al., Journal of Cleaner Production 44) MIT DSpace (Cheah, Duque Ciceri, Olivetti, Matsumura, Forterre, Roth and Kirchain), 2013
  2. Product Environmental Footprint Category Rules (PEFCR) Apparel and Footwear, version 3.1 (29 April 2025) A&F PEFCR Technical Secretariat (Cascale, Quantis, 2BPolicy); copy hosted by Carbonfact, as no European Commission copy could be opened, 2025
  3. Assessment of the Carbon Footprint and VOCs Emissions Caused by the Manufacturing Process of the Footwear Industry in Bangladesh Textile & Leather Review 4(1), 2021
  4. The Scope for Decreasing Pollution Load in Leather Processing (Rev. 1) UNIDO, 2000
  5. Directive 94/11/EC on the labelling of the materials used in the main components of footwear, Article 1 legislation.gov.uk (EU text as retained), 1994
  6. Mechanical characterization and sustainability assessment of recycled EVA for footwears International Journal of Advanced Manufacturing Technology 126, 2023
  7. Environmental assessment of an innovative adhesive for the footwear industry: road map for product development International Journal of Life Cycle Assessment 29, 2024