Material Insights · Understanding the Material World

Footwear: Footprint

Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

VariantMaterialAmount (kg)Emission factor (kg CO2e per kg)Emissions (kg CO2e)
LeatherPolyurethanes (MDI, TDI, polyols)0.268– –
LeatherAdhesives and sealants0.167– –
LeatherEthylene0.022– –
SandalEthylene0.098– –
SandalStyrene-butadiene rubber0.0672.20.1
SandalNatural rubber0.0450.70
SandalPolyurethanes (MDI, TDI, polyols)0.028– –
SandalPVC0.021– –
SandalPolyester fibre0.011– –

Worked out from data

The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

VariantStagePlaceEmissions (kg CO2e)Mass covered by factors
LeatherMakingWorld2.930%
LeatherUseWorld– –
LeatherMakingIndia4.290%
LeatherUseIndia– –
RunningMakingWorld2.93–
RunningUseWorld– –
RunningMakingIndia4.29–
RunningUseIndia– –
SandalMakingWorld3.1142%
SandalUseWorld– –
SandalMakingIndia4.4742%
SandalUseIndia– –

Worked out from data

Energy to make it

Energy used to make one unit, by carrier and stage

Energy to make
  • El Electricity 6.4 kWh · Manufacturing 6.4 kWh per pair (calculated): 23 GWh = 23,000,000 kWh of electricity over all buildings of the Chinese factory, divided by 3,600,000 pairs = 6.39 kWh per pair [1]. The paper gives the 3.6 million pairs for August 2010 to January 2011 in the same data paragraph as the 23 GWh but does not state the period of the 23 GWh, so the figure assumes they match. Coal combustion caused about as much of the manufacturing burden as electricity [1]; coal is not shown because no amount is given.

Estimate · as of 2026-11-16. Running shoe, one factory, from Cheah et al. (2013) [1], which gives no energy per pair itself; the figure is the site's calculation and rests on the period assumption above. A Bangladesh study lists 3.31 MJ a pair in a table (3.24 MJ in its text) on a different basis and is not used [6].

Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

StageValueUnitShareVariantPlaceYearSource
Making13.6kg CO2e per pair: materials 29% plus manufacturing 68% of the 14 kg total (calculated)97Running shoeChina2010[1]
Logistics0.3kg CO2e per pair2.1Running shoeChina2010[1]
Use0kg CO2e per pair (negligible, at most three washes)0Running shoeChina2010[1]
End of life0.37kg CO2e per pair (80% landfilled, 20% incinerated assumed)3Running shoeChina2010[1]

Estimate · as of 2026-11-16. The running-shoe total is 14 ± 2.7 kg CO2e and the shares are the study's [1]; making (13.6 kg) is materials 29% plus manufacturing 68% of 14 kg (calculated), and rounding makes the stages sum to slightly more than 14. No four-stage split was found for the leather shoe or the sandal, so neither is in the table. A Bangladesh model puts the making of a leather shoe at 9.17 kg CO2e, covering its materials, paper packaging, a 15 km transport leg and 5.85 kg for the factory step, with no use or end of life [6]. No whole-sandal figure was found: one EVA outsole for a US size 8 shoe (192 g, one shoe, not a pair, and not a sandal) has a cradle-to-gate footprint of 0.741 kg CO2e [22]. For leather, 1 kg of finished shoe-upper leather has a footprint of 3.41 to 6.30 kg CO2e across five countries, driven mainly by power, then acrylic resin and the chromium tanning agent [7].

End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

RouteSharePlaceYearSource
Collected separately (EU footprint default)12EU2025[4]
Reused (EU footprint default)10EU2025[4]
Disposed of with municipal waste, landfill or incineration with energy recovery (EU footprint default)88EU2025[4]
Recycled into new material (EU default: assumed negligible)– EU2025[4]
Recycled, share of discarded shoes1World2026[20]
Used footwear sent to landfill or incineration95World2026[19]
Sorted footwear in Europe: resold in European second-hand shops5Europe2026[20]
Sorted footwear in Europe: exported90Europe2026[20]
Running-shoe study assumption: landfilled (the rest incinerated)80China2010[1]

as of 2026-11-16. The recycled share of 1 is an upper bound (under 1%) [20]. No share of Indian footwear by end-of-life route was found.

Recovered as

The commodities and chemicals recovered at end of life, with recovery rates

Recovered as
  • Rbr Natural rubber Sorting and mechanical recycling of rubber soles An Indian pilot collected 130 tonnes of post-consumer footwear and sorted over 90 tonnes, including EVA, PVC, rubber and thermoplastic rubber [18]; under 1% of discarded shoes are recycled worldwide [20]. Rubber is the polymer most reliably recovered in sorting trials [21].
  • C2H4 Ethylene Regrinding EVA scrap into new outsoles A blend of 10% recovered EVA scrap cut an outsole's global warming potential by 7.6% [22]; sorting recovers only 6% of EVA in automated trials against 33% by hand [21]. Ethylene stands in for the EVA copolymer.
  • Cr Chromium Recovery of chromium from spent tanning liquor at tanneries Chrome recovery units capture chromium from spent liquor; the 900 KLD common unit at Jajmau was not operating in 2025 [34]. No rate is given.

as of 2026-11-16

End of life in India

Collection and recycling in India, including the informal sector

Agra, India's main shoe hub, makes 0.9 to 1 million pairs a day and about 45 tonnes of footwear waste, nearly 6 tonnes of which is dumped in drains or open spaces, or burnt; over 13 tonnes come from about 6,121 informal home-based businesses [17]. An Indian pilot collected 130 tonnes of used footwear and sorted over 90 tonnes [18]. The CSE study points to a polluter-pays model like plastic EPR [17]; no footwear EPR rule was found.

as of 2026-11-16

Water and waste

Water use and waste per unit where a source gives them

MeasureValueUnitStageYearSource
Tannery effluent per tonne of raw hide, standard methods34 to 56m3 per tonne of raw hideMaterials2000[8]
Footwear waste made in Agra45tonnes per dayManufacturing2024[17]

as of 2026-11-16. The Bangladesh study's 334 litres per pair is left out: its Table 1 gives 334 litres but its Table 3 and text give 0.036 litres [6].

Sources

  1. Manufacturing-focused emissions reductions in footwear production (authors' working paper of Cheah et al., Journal of Cleaner Production 44) MIT DSpace (Cheah, Duque Ciceri, Olivetti, Matsumura, Forterre, Roth and Kirchain), 2013
  2. Product Environmental Footprint Category Rules (PEFCR) Apparel and Footwear, version 3.1 (29 April 2025) A&F PEFCR Technical Secretariat (Cascale, Quantis, 2BPolicy); copy hosted by Carbonfact, as no European Commission copy could be opened, 2025
  3. The Scope for Decreasing Pollution Load in Leather Processing (Rev. 1) UNIDO, 2000
  4. Agra's booming footwear industry leads to massive waste crisis: CSE study calls for urgent action Down To Earth (report of a Centre for Science and Environment study), 2024
  5. From Waste to Resource: The Footwear Recycling Pilot Transforming India Intellecap
  6. Footwear circularity: what's the challenge? Fashion for Good, 2026
  7. Shoes almost never get recycled: here's the data (Closing the Footwear Loop, Phase 1) SGI Europe, 2026
  8. The sneaker economy has a structural recycling problem, finds Fashion for Good study Texfash, 2026
  9. Mechanical characterization and sustainability assessment of recycled EVA for footwears International Journal of Advanced Manufacturing Technology 126, 2023
  10. CPCB flags non-compliance of effluent treatment norms at UP tannery clusters Superkalam (report of CPCB instructions of 18 September 2025), 2025