Gas turbine
An engine that burns gas to spin a turbine for power.
Energy equipment · No. 23
- Electrical and chemical age
The hot gas in a modern gas turbine is hotter than the melting point of the nickel alloy blades it spins.
Chart: Illustration: Gas turbine
Where it comes from
Chart: Map of where it comes from
Brown Boveri's 4 MW turbine at Neuchatel went into commercial service in 1939 at 17.4% efficiency. GE delivered its first power turbine, 3.5 MW, in 1949. Today's largest simple-cycle units make 571 MW.
Three things to know
- The first gas turbine to run commercially for electricity was a 4 MW Brown Boveri machine at Neuchatel in 1939, with an efficiency of 17.4%.
- More than 99% of the life-cycle greenhouse gases of a 16 MW gas turbine installation in Russia came from running it, not from making it.
- GE Vernova, Siemens Energy and Mitsubishi Heavy Industries control about 66% of world gas turbine manufacturing capacity, BloombergNEF says, a share it expects to reach about 70% by 2030.
The journey
- 1 MetalsA 16 MW aeroderivative unit studied in Russia holds 2,630 kg of steel, 1,530 kg of nickel alloys and 750 kg of titanium alloys
- 2 Hot partsNickel superalloy blades, cooled by air and coated with ceramic, face gas hotter than the alloy melts
- 3 Turbine unitCompressor, combustor and turbine on one shaft, delivered as a unit without its generator
- 4 Power plantBurns natural gas; a steam cycle on the exhaust lifts efficiency past 64%
- 5 End of lifeThe study says about 80% of the materials can be recycled, and rhenium is recovered from superalloy scrap