Material Insights · Understanding the Material World

Gas turbine: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Composition is for one 16 MW aeroderivative unit of 5,150 kg, the GTU-16P made in Russia, in one 2024 life cycle study; the paper says it is built on the gas generator of an aircraft engine [2][3]. No bill of materials for a 400 to 570 MW heavy-duty frame turbine was found, so heavy-duty units are not covered. The foundation (concrete, copper, polyethylene, reinforcing steel) and the generator are outside the unit [2]. Ceramic coatings and rhenium have no amounts.

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant Aeroderivative
MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructural2630 kg51.1%
Structural alloy steel 2,150 kg plus stainless steel 480 kg in one GTU-16P unit (one study, one aeroderivative unit), summed (calculated); mass share calculated against the 5,150 kg dry mass; the preprint itself says steel is 51% [2][3]
Ni NickelFunctional1530 kg29.7%
Nickel alloys (alloy mass, not pure nickel) in one GTU-16P unit; the preprint says about 30% by weight; mass share calculated against 5,150 kg [2][3]
Ti TitaniumStructural750 kg14.6%
Titanium alloys (alloy mass, not pure titanium) in one GTU-16P unit; mass share calculated against 5,150 kg [2][3]
Al AluminiumStructural240 kg4.7%
Aluminium alloys in one GTU-16P unit; mass share calculated against 5,150 kg (the five alloy masses sum to 5,150 kg) [2]

as of 2026-11-13. One study, one unit: the 16 MW GTU-16P aeroderivative made in Russia [2][3]. No bill of materials for a heavy-duty frame turbine was found.

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies

as of 2026-11-13

Sources

  1. Life cycle assessment of a gas turbine installation in the Russian Federation (Global Energy 30(2), 74-87; in Russian) Peter the Great St Petersburg Polytechnic University, 2024
  2. Life Cycle Assessment of a Gas Turbine Installation (preprint, version 1, 24 November 2023) Preprints.org, 2023