Integrated circuit (chip): Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Change route | Making | Print layers with EUV instead of repeated DUV exposures | imec says moving from 193i to EUV for N7 significantly lowers energy per wafer; no figure given | Deployed at leading nodes; TSMC began 2 nm volume production in Q4 2025 | ASML is the only EUV supplier | Chipmakers, ASML | [4][36][25] |
| Efficiency | Making | Abate and replace high-warming etch gases (CF4, NF3) | Abatement can cut these emissions by a factor of 10; one process change cut CF4 use by 98% against the original | Deployed (abatement); piloted (process redesign) | Not stated in the page opened | Fabs, equipment makers | [4] |
| Design | Components design | Raise yield, above all for large dies | imec: a 2% yield loss on a large N2 die means about 42 tonnes CO2e | Deployed | Not stated | Chip designers, fabs | [4] |
| Electrify | Making | Buy renewable electricity for fabs | Electricity (scope 2) can make up 60% of the footprint (imec); TSMC's electricity was 20.1% renewable in 2025 | Deployed | TSMC 20.1% in 2025, 2030 goal 60% | Chipmakers, utilities | [4][6][42] |
| Efficiency | Making | Recycle and reuse fab water | TSMC's unit water consumption per wafer mask layer fell 4.8%, from 161.0 to 153.3 litres, between 2024 and 2025 | Deployed | TSMC reports 21% water positive in 2025 against a 17% target | Fabs | [6][7] |
| Substitute | Components design | Use a mature node where the function allows | ACT model parameters for fab electricity per cm2 are 0.90 kWh at 28 nm against 2.75 kWh at 3 nm, about 3.1 times (calculated) | Deployed | Not stated | Chip designers, buyers | [5] |
| Use less | Use | Keep the devices and servers that hold chips in use longer | imec: embodied emissions of the chips powering AI make up 30% of the footprint of AI data centres; no source gives the saving from longer life | Deployed | Not stated | Operators, buyers | [4] |
| Circularity | End of life | Collect and recycle e-waste so its metals return | In 2022, 22.3% of e-waste was documented as recycled and USD 28 billion of USD 91 billion of metal value was recovered; no figure for chips | Deployed | 22.3% of e-waste mass, world, 2022 | Producers, recyclers, regulators | [31] |
as of 2026-11-13
Sources
- How can we reduce environmental impact in chip manufacturing? imec (first published in Semiconductor Digest, July/August 2025 issue), 2025
- ACT: Designing Sustainable Computer Systems With An Architectural Carbon Modeling Tool Gupta et al., ISCA '22, 2022, Tables 1, 7 and 8; Equation 5
- TSMC 2025 Sustainability Report Taiwan Semiconductor Manufacturing Company (TSMC), 2026, pp. 6, 10, 24, 110
- TSMC 2025 Climate and Nature Report Taiwan Semiconductor Manufacturing Company (TSMC), 2026, p. 31
- ASML Annual Report 2025: strategic report ASML Holding N.V., pp. 8, 17, 22
- The Global E-waste Monitor 2024 (executive summary) UNITAR and ITU, 2024
- TSMC officially begins 2nm chip volume production in Q4 2025 Focus Taiwan (Central News Agency), 30 December 2025, 2025
- 2024 Sustainability Report Highlights Taiwan Semiconductor Manufacturing Company (TSMC), 2025, p. 8