Integrated circuit (chip): Working
What it is
The product and the job it does, in a short paragraph
An integrated circuit chip is a small piece of semiconductor, nearly always silicon, that carries a whole electronic circuit and sits in a protective package with pins or pads. This node covers packaged chips of every kind: processors, memory, analogue and power chips. The functional unit is one packaged chip. Bare wafers, circuit boards and chip-making machines are left out.
as of 2026-11-13
How it works
How it does its job, step by step in plain words
Chips are made on thin round wafers of very pure silicon, today mostly 300 mm across [14]. In a factory called a fab, each wafer goes through repeated cycles: coat it with light-sensitive resist, print a pattern with light, etch away the exposed material, then add thin layers of insulator or metal. A leading chip needs up to 1,500 such steps [38]. Hundreds of identical chips, called dies, sit on one wafer. The wafer is tested and cut up. A good die is fixed to a lead frame, joined by fine wires and sealed in epoxy [9]. The twin technology page explains the physics.
as of 2026-11-13
Key specifications
The numbers that describe it, each with unit, variant, year and source
| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Packaged mass of a 32 MB DRAM chip on a 200 mm wafer (one 2002 study of one chip type) | 2 | g | – | 2002 | [9] |
| Die area of the same DRAM chip (one 2002 study of one chip type) | 1.2 | cm2 | – | 2002 | [9] |
| Wafer area used per chip, including yield loss (75% of input silicon ends up as working DRAM; one 2002 study of one chip type) | 1.6 | cm2 | – | 2002 | [9] |
| Fab electricity per cm2 of wafer, 28 nm (ACT model parameter for application-processor manufacturing) | 0.9 | kWh per cm2 | Mature | 2022 | [5] |
| Fab electricity per cm2 of wafer, 14 nm (ACT model parameter) | 1.2 | kWh per cm2 | – | 2022 | [5] |
| Fab electricity per cm2 of wafer, 7 nm (ACT model parameter) | 1.52 | kWh per cm2 | Leading | 2022 | [5] |
| Fab electricity per cm2 of wafer, 3 nm (ACT model parameter) | 2.75 | kWh per cm2 | Leading | 2022 | [5] |
| Process gas emissions per cm2 of wafer, 3 nm, 95% abated (ACT model parameter) | 0.47 | kg CO2e per cm2 | Leading | 2022 | [5] |
| Process gas emissions per cm2 of wafer, 28 nm, 95% abated (ACT model parameter) | 0.175 | kg CO2e per cm2 | Mature | 2022 | [5] |
| Raw material emissions per cm2 of wafer, all nodes (ACT model input taken from an LCA) | 0.5 | kg CO2e per cm2 | – | 2022 | [5] |
Indicative · as of 2026-11-13. The ACT per-cm2 values are model parameters for application-processor manufacturing, not measurements of one fab [5]. The DRAM figures come from one 2002 study of one chip type, a 200 mm-wafer chip of about 2000, and are far from today's chips [9].
Variants
The variants whose make-up or footprint differs a lot, what defines each and its share of units
| Variant | Defining spec | Year | Source |
|---|---|---|---|
| Mature | Chips made on a process of 28 nm or larger (this page's grouping); ACT model parameter of 0.90 kWh of fab electricity per cm2 of wafer at 28 nm | 2022 | [5] |
| Leading | Chips made on a process of 7 nm or smaller (this page's grouping); ACT model parameters of 1.52 to 2.75 kWh of fab electricity per cm2 of wafer from 7 nm to 3 nm | 2022 | [5] |
Indicative · as of 2026-11-13. The split by process node is this page's grouping, not a source's: ACT's model parameters for fab electricity per cm2 rise about threefold from 28 nm to 3 nm [5]. No source gives the share of chips sold at each node. 14 nm and 10 nm chips sit between the two and carry no variant label.
Limits
The physical limits set by science and the engineering limits of today's design, with today's value
| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Wavelength of the light used to print the finest patterns (EUV, against 193 nm for the best DUV machines); the diffraction limit is set by it | Physical | 13.5 | 13.5 | nm | [35] |
| Smallest feature a High-NA EUV machine prints (against 13 nm for current EUV) | Engineering | 8 | 13 | nm | [35] |
as of 2026-11-13
Science it relies on
The science principles it works by or is limited by
Relies on- Band theory of solids Silicon is a semiconductor because of its band structure, which is why its conduction can be set spot by spot.
- The p-n junction Junctions between differently doped regions form transistors and keep the parts of a chip apart.
- Diffraction limit of resolution The wavelength of the printing light sets the smallest pattern a lithography machine can resolve.
as of 2026-11-13
Sources
- ACT: Designing Sustainable Computer Systems With An Architectural Carbon Modeling Tool Gupta et al., ISCA '22, 2022, Tables 1, 7 and 8; Equation 5
- The 1.7 Kilogram Microchip: Energy and Material Use in the Production of Semiconductor Devices Williams, Ayres and Heller, Environmental Science & Technology (author copy on freedomsolarpower.com), 2002
- Global 300mm Semiconductor Fab Capacity Projected To Reach New High in 2025, SEMI Reports SEMI, press release of 11 October 2022, 2022
- 5 things you should know about High NA EUV lithography ASML, 25 January 2024, 2024
- Semiconductor manufacturing footprint: sustainability as roadmap metric Marie Garcia Bardon, imec (presentation slides, September 2020), 2020