Mineral wool insulation: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Composition follows one stone wool declaration (R = 1, 2019) and general EURIMA descriptions; glass wool uses a 2022 URSA declaration for mass. Masses per m2 are calculated from product densities, which vary widely: stone wool 33 to 200 kg/m3 [5]. Binder is 2 to 6% of weight [9]. Slag, cullet and basalt have no commodity node here, so they are named in notes only.
as of 2026-11-16
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Stone wool| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Phe Phenol and acetone | Functional | 0.78 kg | 7.2% |
| Binder is 7.2% of one stone wool declaration [4], above the 2 to 6% that EURIMA gives [9]; about 0.78 kg per m2 at 100 mm and 109 kg/m3 (calculated). Phenolic resins are the usual binder [31]; this row carries the whole binder, with formaldehyde its co-reactant. | |||
| Stn Crushed stone | Structural | Not given | 75% |
| Basalt, diabase and dolomite rock [1]; one declaration, for a 25 kg/m3 product, gives non-scarce natural stone and cement as 75% of the product [4]. Applied to 10.9 kg per m2 at 109 kg/m3, that is about 8 kg (calculated). | |||
| Cem Cement | Functional | Not given | – |
| Cement bonds recycled briquettes in the stone wool mix; it is counted inside the 75% stone and cement share, not separately [4]. | |||
| HCHO Formaldehyde | Functional | Not given | – |
| Co-reactant in phenolic binder; its share is inside the binder amount above [31]. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Phe Phenol and acetone | Functional | 0.06 to 0.17 kga range, no single figure | – |
| Binder is 2 to 6% of weight [9]; for 2.9 kg per m2 that is 0.06 to 0.17 kg (calculated). Phenolic resin is common [31]; bio-sourced binders are sold [30]. | |||
| Qz Silica sand | Structural | Not given | – |
| Sand, with limestone and soda ash, is the primary batch for glass wool [1]; no amount per m2 found. | |||
| Sda Soda ash | Functional | Not given | – |
| Soda ash is a glass-making flux in the batch [1]; its carbonate releases CO2 on melting [8]. | |||
| HCHO Formaldehyde | Functional | Not given | – |
| Co-reactant in phenolic binder; bio-sourced binders avoid it [30]. | |||
Indicative · as of 2026-11-16. Amounts per square metre at 100 mm assume a density of 109 kg/m3 for stone wool and 29 kg/m3 for glass wool (calculated); products vary widely.
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Batch | Rock and slag (stone wool), or sand, limestone, soda ash and cullet (glass wool), are weighed and mixed | – | [1] |
| Melt | Melted at about 1,300 to 1,500 degrees Celsius in a cupola, gas or electric furnace | Glassmaking | [1][8] |
| Fibre | Melt falls onto rapidly rotating wheels and is flung off as fibres | – | [1] |
| Bind | Small quantities of binder are added to hold the fibres together | – | [1] |
| Cure | A curing oven at about 200 degrees Celsius sets the binder and the final shape | Boilers, furnaces and stoves | [1] |
| Cut and pack | Mats are cut into rolls, slabs or boards and packed | – | [1] |
as of 2026-11-16
Technologies used to make it
The technologies used to make it, at which step
Made with- Gl Glassmaking Melting glass cullet and sand into glass wool Glass wool is made from sand and recycled glass, like bottles [29].
- Blr Boilers, furnaces and stoves Gas and coke melting, and gas-fired curing ovens · 87% share Calculated: 100% minus the 13% of EU output melted with electricity only [8]; stone wool melting is mainly in coke-gas cupolas [8].
- EH Electric heating Electric melting · 13% share About 13% of EU output used electricity only for melting in the 2009 sector study [8].
as of 2026-11-16
Sources
- Producing glass and stone wool EURIMA (European Insulation Manufacturers Association)
- ROCKWOOL Thermal Insulation: 1 m2 of stone wool thermal insulation with R=1 m2K/W (EPD-RWI-20190050-CBD1-EN) ROCKWOOL International A/S, Institut Bauen und Umwelt e.V. (IBU), 2019
- ROCKWOOL stone wool building technical insulation (EPD-RWI-20200006-CCD1-EN) ROCKWOOL, Institut Bauen und Umwelt e.V. (IBU), 2020
- Methodology for the free allocation of emission allowances in the EU ETS post 2012: Sector report for the mineral wool industry Ecofys, Fraunhofer ISI and Oko-Institut for the European Commission, 2009
- EURIMA carbon neutrality roadmap 2050 EURIMA, 2023
- Mineral Wool: Building a Sustainable Future EURIMA, 2013
- EPD-IES-0004464:001 Isover Glass Wool Insulation 4+ with facing Saint-Gobain Italia, International EPD System, 2021
- Phenolic resins for glass and stone wool Fenolit, 2022