Mineral wool insulation: Footprint
Raw materials in one unit
Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions
| Variant | Material | Amount (kg) |
|---|---|---|
| Stone | Phenol and acetone | 0.78 |
Worked out from data
The site's estimate
Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors
| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| Stone | Making | World | 8 | 0% |
| Stone | Use | World | -5100 | 100% |
| Stone | Making | India | 8 | 0% |
| Stone | Use | India | -5100 | 100% |
| Glass | Making | World | 2.95 | – |
| Glass | Use | World | -5100 | 100% |
| Glass | Making | India | 2.95 | – |
| Glass | Use | India | -5100 | 100% |
Worked out from data
Energy to make it
Energy used to make one unit, by carrier and stage
Energy to make- Ht Heat 114 MJ · Manufacturing Stone wool Midpoint of 76 to 153 MJ per m2 at 100 mm (calculated): 7 to 14 GJ per tonne for stone and slag wool [8] times 10.9 kg [6]. Fuels are coke and gas in cupolas, or electricity.
- Ht Heat 42 MJ · Manufacturing Glass wool Midpoint of 26 to 58 MJ per m2 at 100 mm (calculated): 9 to 20 GJ per tonne for glass wool [8] times 2.9 kg [3]. Mostly gas, some electricity.
Indicative · as of 2026-11-16. 2009 EU sector figures; melting is 20 to 45% of glass wool energy and 60 to 80% of stone wool energy [8]. Each 10% of cullet cuts energy by 2 to 3% per tonne [9]. ROCKWOOL reports a CO2-per-tonne index of 77 in 2024 against 100 in 2015 [20].
Energy in use
Energy one unit uses per year of use, by carrier
Energy in use- Ht Heat -243 kWh per year · lifetime 50 years Calculated, 100 mm stone wool on an uninsulated solid wall: (1) R added = 0.100 m / 0.036 W/(m K) = 2.78 m2K/W [6]; (2) baseline U0 = 2.1 W/m2K, the typical UK solid wall value [38], so R0 = 1/2.1 = 0.476 m2K/W; (3) U1 = 1 / (0.476 + 2.78) m2K/W = 0.307 W/m2K; (4) saving 2.1 minus 0.307 = 1.79 W/m2K; (5) 1.79 W/m2K x 5,656 K day per year (Finland's 1979 to 2022 average heating degree days, base 18 degrees Celsius [27]) x 24 h per day = 243,000 Wh = about 243 kWh per m2 per year; about 12,200 kWh over 50 years. Negative means energy saved.
- Ht Heat -138 kWh per year · lifetime 50 years Calculated, 100 mm stone wool on an uninsulated solid wall: (1) R added = 0.100 m / 0.036 W/(m K) = 2.78 m2K/W [6]; (2) baseline U0 = 2.1 W/m2K, the typical UK solid wall value [38], so R0 = 1/2.1 = 0.476 m2K/W; (3) U1 = 1 / (0.476 + 2.78) m2K/W = 0.307 W/m2K; (4) saving 2.1 minus 0.307 = 1.79 W/m2K; (5) 1.79 W/m2K x 3,199 K day per year (EU average heating degree days, 1979 to 2022 [27]) x 24 h per day = 137,600 Wh = about 138 kWh per m2 per year; about 6,900 kWh over 50 years. Negative means energy saved.
- Ht Heat -23 kWh per year · lifetime 50 years Calculated, 100 mm stone wool on an uninsulated solid wall: (1) R added = 0.100 m / 0.036 W/(m K) = 2.78 m2K/W [6]; (2) baseline U0 = 2.1 W/m2K, the typical UK solid wall value [38], so R0 = 1/2.1 = 0.476 m2K/W; (3) U1 = 1 / (0.476 + 2.78) m2K/W = 0.307 W/m2K; (4) saving 2.1 minus 0.307 = 1.79 W/m2K; (5) 1.79 W/m2K x 544 K day (Malta's heating degree days in 2022 [27]) x 24 h per day = 23,400 Wh = about 23 kWh per m2 per year; about 1,200 kWh over 50 years. Cooling savings are not counted. Negative means energy saved.
Estimate · as of 2026-11-16. Worked steady-state estimate of useful heat, not a measured saving; it ignores thermal bridges, heating system efficiency and cooling. Measured solid walls average 1.3 W/m2K [38], which would cut the EU average saving to about 78 kWh per m2 a year (calculated). Glass wool at R = 3.10 [3] gives about 140 kWh at the EU average (calculated). Against making energy of 21 to 42 kWh per m2 (calculated: 7 to 14 GJ per tonne [8] x 0.0109 t, divided by 3.6 MJ per kWh), payback is about 0.09 to 0.17 years in Finland, 0.15 to 0.31 at the EU average and 0.9 to 1.8 years in Malta (calculated). A Canadian study finds carbon payback of 1.09 to 2.69 years for mineral wool [28]; a review finds operational savings dominate embodied burdens [7].
Emissions by stage
Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant
| Stage | Value | Unit | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|
| Making | 4.58 | kg CO2e per m2 at R = 1 m2K/W, cradle to gate (A1 to A3) | Stone wool | United Kingdom | 2026 | [6] |
| Making | 1.11 | kg CO2e per m2 at R = 1 m2K/W, cradle to gate (A1 to A3) | Stone wool | Europe | 2019 | [4] |
| Making | 12.7 | kg CO2e per m2 at 100 mm (functional unit), cradle to gate; 4.58 times 100/36 (calculated) | Stone wool | United Kingdom | 2026 | [6] |
| Making | 2.63 | kg CO2e per m2 at 100 mm (R = 3.10), cradle to gate (A1 to A3); about 0.85 per R = 1 (calculated) | Glass wool | Europe | 2022 | [3] |
| Making | 14 | kg CO2e per m2 at 100 mm from 1.28 kg CO2e per kg times 10.9 kg (calculated; ICE v4.1 summary) | Stone wool | World | 2025 | [25] |
| Making | 3.9 | kg CO2e per m2 at 100 mm from 1.35 kg CO2e per kg times 2.9 kg (calculated; ICE v4.1 summary) | Glass wool | World | 2025 | [25] |
Indicative · as of 2026-11-16. Making dominates the life-cycle emissions of the product itself: 63% of its carbon footprint on one industry estimate [9]. The large spread reflects different plants, densities (the 1.11 figure is for a 25 kg/m3 product, the 4.58 for 109 kg/m3) and electricity. A review of 223 values reports literature results of 2.77 and 5.85 kg CO2e per m2 at R = 1 for stone wool and 7.70 and 8.63 for glass wool, with no common basis [7]. The ICE page shows version 4.1 (October 2025) while Circular Ecology lists V5.0 (June 2026) as current [36]. Logistics, use and end-of-life emissions per m2 were not found. Use-phase avoided heat is in energy in use.
End of life
What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place
| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Recycling (back into wool), EPD scenario | 3 | Europe | 2020 | [5] |
| Landfill, EPD scenario (0.97 kg of 1 kg) | 97 | Europe | 2020 | [5] |
| Landfill, glass wool EPD scenario | 100 | Europe | 2022 | [3] |
| Recycled content of new wool, average (not an end-of-life share) | 25 | Europe | 2022 | [2] |
as of 2026-11-16. Declared scenarios, not measured collection rates. No India figure found.
End of life in India
Collection and recycling in India, including the informal sector
Wool is mostly landfilled at the end of building life in declared scenarios, even though the stone wool maker calls it fully recyclable [5][3]. The industry expects 570 thousand tonnes of waste a year in the EU by 2035 and says cheap landfill makes recovery hard to justify [2]. No Indian end-of-life figure or extended producer responsibility rule for mineral wool was found.
as of 2026-11-16
Sources
- How circular is the mineral wool industry (infographic) EURIMA
- Environmental Product Declaration: URSA TERRA Mur P1203 / TER32KP glass wool (S-P-07760) URSA Insulation S.A., International EPD System, 2022
- ROCKWOOL Thermal Insulation: 1 m2 of stone wool thermal insulation with R=1 m2K/W (EPD-RWI-20190050-CBD1-EN) ROCKWOOL International A/S, Institut Bauen und Umwelt e.V. (IBU), 2019
- ROCKWOOL stone wool building technical insulation (EPD-RWI-20200006-CCD1-EN) ROCKWOOL, Institut Bauen und Umwelt e.V. (IBU), 2020
- Stone wool thermal insulation, R=1 m2K/W (EPD-IES-0007330:001, ROCKWOOL A/S), material page One Click LCA, quoting an International EPD System declaration, 2026
- Methodology for the free allocation of emission allowances in the EU ETS post 2012: Sector report for the mineral wool industry Ecofys, Fraunhofer ISI and Oko-Institut for the European Commission, 2009
- ICE database embodied carbon (summary of ICE v4.1 insulation values) Green Calculus, quoting Circular Ecology ICE database v4.1, 2026
- Heating and cooling degree days statistics Eurostat, Statistics Explained, 2024
- Solid-wall U-values: heat flux measurements compared with standard assumptions (Li et al., Building Research and Information 43(2)) UCL Bartlett School of Environment, Energy and Resources, 2016