Material Insights · Understanding the Material World

Mineral wool insulation

A mat of fine stone or glass fibres that slows the flow of heat through walls and roofs.

Buildings and construction · No. 89

  • Second industrial revolution
Buildings and construction · Product

A thin mat of spun rock or glass can repay the energy used to make it within months in a cold climate.

Chart: Illustration: Mineral wool insulation

Where it comes from

Chart: Map of where it comes from

Edward Parry tried making wool from furnace slag in Wales in 1840. Commercial production began in Germany in 1871. Owens-Corning was formed in 1938, and by 1940 its glass wool insulation cost less than mineral wool.

Three things to know
  1. Stone wool is made from about 75% rock and cement, 17.5% slag and 7.2% binder in one declared product.
  2. Glass wool can be up to 85% recycled glass, and every 10% of cullet cuts the energy used per tonne by 2 to 3%.
  3. India's 2018 residential code sets a maximum roof U-value of 1.2 W/m2K, and its commercial code sets 0.33 for most roofs.
The journey
  1. 1 Rock or glassBasalt, dolomite and slag for stone wool; sand and recycled glass for glass wool
  2. 2 MeltingMelted at about 1,300 to 1,500 degrees Celsius in a coke cupola, gas furnace or electric melter
  3. 3 FibreThe melt is flung off spinning wheels into fine fibres
  4. 4 Binder and curingA small amount of resin binder is added and cured in an oven at about 200 degrees Celsius
  5. 5 In the buildingMats and slabs fill walls, roofs and ducts for 50 to 60 years
  6. 6 End of lifeMostly landfilled today; recycling into new wool is small but growing

Try this in What if Switch on levers and see what changes in India by 2036.

Covered in Heat and thermodynamics: engines, heat pumps and their limitsEngineering
Go deeper pick a tab to open it in full