Permanent magnet: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Per kg of finished magnet. Sintered NdFeB is about 30% rare earths, 69% iron and 1% boron [1]; the Nordelöf inventory adds 1.1% nickel for the coating and lists inputs above 1 kg because of losses [5]. Ferrite is given as pure strontium hexaferrite, about 63% iron and 8% strontium by formula (calculated), the rest oxygen [13]. Heavy rare earths rise with the heat grade. Samarium cobalt is not covered.
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Sintered NdFeB| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Fe Iron ore | Structural | 0.69 kg | 69% |
| Iron is 69% of the magnet by weight [1]; it enters as electrolytic iron metal, 830 g per kg of coated magnet in the inventory [5]. Iron ore is the nearest node, so the amount is iron content, not ore mass. | |||
| REE Rare earths | Functional | 0.3 kg | 30% |
| Roughly 30% of the magnet by weight [1]; the JRC's average wind-generator magnet is 28.5% neodymium and 4.4% dysprosium, 32.9% together (calculated) [4]. Nordelof and Tillman use 310 g neodymium and 91 g dysprosium oxide per kg of magnet as inputs [5]. | |||
| Ni Nickel | Functional | 0.011 kg | 1.1% |
| Nickel coating that stays on the magnet, 11 g per kg of coated magnet as an input [5]. | |||
| B Boron | Functional | 0.01 kg | 1% |
| Boron is 1% of the magnet by weight [1]; the inventory uses 15 g boron carbide per kg [5]. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Fe Iron ore | Structural | 0.631 kg | 63.1% |
| Iron content of SrO.6Fe2O3, calculated from the formula [13]; it enters as iron oxide. Iron ore is the nearest node, so the amount is iron content, not ore mass. The rest of the mass is oxygen. | |||
| Sr Strontium | Functional | 0.083 kg | 8.3% |
| Strontium content of SrO.6Fe2O3, calculated from the formula [13]; it enters as strontium carbonate [13]. | |||
as of 2026-11-13
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Rare earth oxide from ore | Ore is mined, concentrated, roasted in acid, leached and separated by solvent extraction into rare earth oxides. | – | [6] |
| Reduce the oxide to metal | Neodymium oxide is reduced to metal by fused salt electrolysis, then alloyed with iron and boron and strip cast. | – | [6][5] |
| Make fine powder | The cast alloy is broken up by hydrogen decrepitation and jet milled into fine powder. | – | [6] |
| Align, press and sinter | The powder is aligned in a magnetic field, pressed and sintered into a dense block. | – | [6] |
| Machine, coat and magnetise | The block is ground and sliced, coated with nickel, then magnetised by a strong short pulse. | Electroplating | [6][5] |
| Ferrite route | Iron oxide is mixed with strontium or barium carbonate; as an oxide, it is processed in air; no rare earths are involved. | – | [13][11] |
as of 2026-11-13
Technologies used to make it
The technologies used to make it, at which step
Made with- Ep Electroplating Coating the sintered block against corrosion Electroplating is the last stage in the VALOMAG baseline [6]; the inventory coats with nickel [5].
as of 2026-11-13
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- Nd Neodymium magnets 1 kg Sintered NdFeB The magnet is the technology, in the form of one kilogram.
as of 2026-11-13
Sources
- Rare Earth Permanent Magnets: Supply Chain Deep Dive Assessment US Department of Energy, 2022
- Raw materials demand for wind and solar PV technologies in the transition towards a decarbonised energy system (Carrara et al., EUR 30095 EN), Table 4 European Commission Joint Research Centre, 2020
- A scalable life cycle inventory of an electrical automotive traction machine, Part II: manufacturing processes (Nordelöf and Tillman) The International Journal of Life Cycle Assessment, vol. 23, 2018
- Upscale of Permanent Magnet Dismantling and Recycling, VALOMAG (19049): Life cycle assessment baseline, version 1 (Li and Sprecher, 17 March 2022) Leiden University, 2022
- Permanent Magnet Materials and Current Challenges (Constantinides and De Leon) Arnold Magnetic Technologies
- Ferrite magnet (Wikipedia, mirrored copy) Wikipedia, 2026