Material Insights · Understanding the Material World

Permanent magnet: Working

What it is

The product and the job it does, in a short paragraph

A permanent magnet keeps a magnetic field without any electric power. This node covers magnets sold by weight: mostly sintered neodymium-iron-boron (NdFeB), the strongest kind and a magnet of metal (HS 8505.11), with ferrite (ceramic) magnets, classed under HS 8505.19, as the cheap, weaker alternative. They sit inside motors, generators, loudspeakers, disk drives and wind turbines. The functional unit is one kilogram of finished magnet. Samarium cobalt, alnico and bonded magnets are left out. Sintered NdFeB is 93% of the NdFeB market [1].

as of 2026-11-13

How it works

How it does its job, step by step in plain words

A hard magnet keeps the tiny magnetic moments of its iron atoms lined up after the field that aligned them is gone. A sintered NdFeB magnet is about 30% rare earths, 69% iron and 1% boron by weight [1]. Its alloy powder is pressed in a magnetic field, sintered into a block, then ground, coated and magnetised [6][5]. A ferrite magnet is iron oxide with strontium or barium carbonate [13]. Inside a motor the fixed field pushes on current in the coils; inside a generator it induces current as it moves past them. Because the field needs no current, there is no field-winding loss, which is why magnets let motors and generators be small. Small additions of dysprosium or terbium (0.5 to 11%) keep NdFeB strong when hot [1].

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Maximum energy product (BHmax)410kJ per m3Sintered NdFeB2023[9]
Maximum energy product (BHmax)38kJ per m3Ferrite2023[9]
Maximum energy product of grade 38SH (sintered NdFeB) at 23 C37.8MGOeSintered NdFeB2003[10]
Maximum energy product of sintered ferrite at 23 C3.9MGOeFerrite2003[10]
Maximum recommended temperature of the SH grade150CSintered NdFeB2003[10]
Grades available for use up to250CFerrite2003[10]
Rare earth share of mass30%Sintered NdFeB2022[1]
Dysprosium share of mass, standard grade (under 0.5) to AH grade (8.5 to 11)11% (upper end)Sintered NdFeB2022[1]
Iron and strontium content of pure strontium hexaferrite, SrO.6Fe2O3 (calculated from the formula)about 63 and 8% of massFerrite– [13]
Neodymium share in the average magnet of a wind generator28.5%Sintered NdFeB2020[4]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Sintered NdFeBNd2Fe14B alloy pressed and sintered; about 410 kJ per m3, roughly 30% rare earths; 93% of the NdFeB magnet market is sintered2022No share of all magnet tonnage found; 93% of NdFeB magnets are sintered [1] (sintered NdFeB is 6% EV, 14% offshore wind, 30% industrial motors in 2020 demand)
FerriteIron oxide with strontium or barium carbonate; about 38 kJ per m3, no rare earths; USD 3 to 6 per kg2023No dated share of magnet sales by weight found; price from [9]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindTodayUnitSource
Energy product of the strongest commercial magnet (sintered NdFeB)Engineering410kJ per m3[9]
Operating temperature of the SH grade of sintered NdFeB, before it loses strength (ferrite grades reach 250 C)Engineering150C[10]
Dysprosium needed to keep NdFeB strong at heat (AH grade, upper end of 8.5 to 11%)Engineering11% of mass[1]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on

as of 2026-11-13

Sources

  1. Rare Earth Permanent Magnets: Supply Chain Deep Dive Assessment US Department of Energy, 2022
  2. Raw materials demand for wind and solar PV technologies in the transition towards a decarbonised energy system (Carrara et al., EUR 30095 EN), Table 4 European Commission Joint Research Centre, 2020
  3. A scalable life cycle inventory of an electrical automotive traction machine, Part II: manufacturing processes (Nordelöf and Tillman) The International Journal of Life Cycle Assessment, vol. 23, 2018
  4. Upscale of Permanent Magnet Dismantling and Recycling, VALOMAG (19049): Life cycle assessment baseline, version 1 (Li and Sprecher, 17 March 2022) Leiden University, 2022
  5. Powering the green economy: the quest for magnets without rare earths (James McKenzie) Physics World, 2023
  6. Sintered & Bonded NdFeB Magnets - 2003 (presented by Steve Constantinides, 15 to 17 October 2003) The Arnold Engineering Co. (Arnold Magnetic Technologies), 2003
  7. Ferrite magnet (Wikipedia, mirrored copy) Wikipedia, 2026