Material Insights · Understanding the Material World

Solar PV cell: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Amounts are for one watt of crystalline silicon cell. Silver per watt is the 2025 ITRPV figure by cell type; silicon is Fraunhofer's 2024 average of polysilicon used per watt for all cells. Aluminium is calculated from a 2020 inventory of older p-type cells; copper is not yet published per watt. A cell has no product-node components. [2, 5, 12, 13]

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant 1 Not stated
MaterialRoleAmount in one unitShare of the unit's mass
pSi PolysiliconStructural0.002 kg–
About 2.0 g of silicon used per watt in 2024, down from about 16 g in 2004; this is polysilicon used, including sawing losses, for all crystalline silicon cells; the silicon left in the finished cells of a 2024 TOPCon module is about 1.2 g per watt (calculated from its EPD) [5]
Variant 2 PERC
MaterialRoleAmount in one unitShare of the unit's mass
Al AluminiumFunctional0 kg–
Rear contact of p-type cells. The 2020 inventory of older p-type cells lists 46.2 g of aluminium per square metre of cell (in 57.2 g of paste), about 0.22 g per watt at about 214 W per square metre of cell (calculated, older cells, weak); no watt-based figure for current cells is published [13]
Ag SilverFunctional0 kg–
8.9 mg of silver paste per watt, 2025 [2]
Variant 3 TOPCon
MaterialRoleAmount in one unitShare of the unit's mass
Ag SilverFunctional0 kg–
About 10 mg per watt, median 2025; a 2025 outlook expects 6.3 mg per watt within ten years [2, 12]
Variant 4 Heterojunction
MaterialRoleAmount in one unitShare of the unit's mass
Ag SilverFunctional0 kg–
12.0 mg per watt, 2025; heterojunction cells use low-temperature metallisation [2, 4]
Cu CopperFunctionalNot given –
Copper is expected to replace silver in heterojunction contacts: copper-based metallisation 62% and pure copper 30% by 2036 in the outlook [2]
Variant 5 Back contact
MaterialRoleAmount in one unitShare of the unit's mass
Ag SilverFunctional0 kg–
12.2 mg per watt for the TOPCon-based back contact type, 2025 [2]

as of 2026-11-13

Cost breakdown

The share of the unit's cost in each component or stage

PartShare of costVariantYearSource
Polysilicon24%TOPCon2025Calculated from USD 0.023 of the USD 0.096 per Wp that polysilicon, wafer and cell steps cost together; one IRENA case, all-domestic production in Viet Nam [11]
Wafer34.4%TOPCon2025Calculated from USD 0.033 of USD 0.096 per Wp; same single Viet Nam case [11]
Cell processing41.7%TOPCon2025Calculated from USD 0.040 of USD 0.096 per Wp; same single Viet Nam case [11]

as of 2026-11-13

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensTechnologySource
Purify siliconQuartz is reduced to silicon and refined to polysilicon.– –
Grow ingotSingle-crystal ingots are pulled from molten polysilicon; monocrystalline wafers made up nearly all 2025 output.Czochralski crystal growth[5]
Slice wafersDiamond wire saws cut ingots into wafers about 140 micrometres thick.– [5]
Texture and form the junctionThe surface is etched to trap light and doped to make the p-n junction.– –
PassivateThin layers (aluminium oxide, tunnel oxide with doped polysilicon, or amorphous silicon) cut electron losses at the surfaces.– –
Print and fire contactsSilver (and aluminium) paste is screen-printed and fired, or copper is plated in newer designs.– [2]
Test and sortEach cell is measured and binned by power before module assembly.– –

as of 2026-11-13

Technologies used to make it

The technologies used to make it, at which step

Made with
  • Cz Czochralski crystal growth Pulling single-crystal silicon ingots for monocrystalline wafers Monocrystalline silicon made 690 of about 706 GWp of module production in 2025 [5]

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies
  • PV Solar photovoltaics 1 W Each watt of cell is a photovoltaic junction; the working principle is on the technology page.

as of 2026-11-13

Sources

  1. ITRPV 2026: Solar industry maintains historic learning curve despite market turbulence PV Tech, 2026
  2. ITRPV Expects TOPCon To Lead As BC And Tandem Technologies Expand TaiyangNews, 2026
  3. Photovoltaics Report Fraunhofer Institute for Solar Energy Systems ISE, 2026
  4. Solar PV Supply Chain Cost Tool: Methodology, results and analysis International Renewable Energy Agency (IRENA), copy hosted by the Clean Energy Ministerial, 2026
  5. International Technology Roadmap for Photovoltaics (ITRPV): Results 2025, Seventeenth Edition VDMA Photovoltaics Equipment (copy hosted by QualEnergia.it), 2026
  6. Life Cycle Inventories and Life Cycle Assessments of Photovoltaic Systems (Report IEA-PVPS T12-19:2020) IEA PVPS Task 12, 2020