Material Insights · Understanding the Material World

Solar PV cell: Working

What it is

The product and the job it does, in a short paragraph

A solar cell is a thin slice of treated silicon that turns light into direct-current electricity. This node covers finished crystalline silicon cells that are not yet joined into modules, under the trade heading for photovoltaic cells not assembled in modules. The functional unit is one watt of cell capacity, the power a cell gives under standard test light. Thin film cells, wafers and modules are left out; polysilicon has its own node.

as of 2026-11-13

How it works

How it does its job, step by step in plain words

A cell starts as a silicon wafer, about 140 micrometres thick for PERC cells and 130 for TOPCon [12, 4]. Its surface is textured to trap light, and doping creates a p-n junction, where freed electrons are pushed one way. A thin passivating layer on the surface and rear stops electrons being lost: PERC adds a rear layer, TOPCon adds a tunnelling oxide and doped polysilicon layer, and heterojunction cells add thin amorphous silicon layers. Fine lines of silver paste printed on the front collect the current, and a rear contact of aluminium or silver completes the circuit. Back contact cells put both contacts on the rear, so no grid shades the front. The cell is tested and sorted by power before it goes into a module.

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Silver per watt of cell8.9mg/WPERC2025[2]
Silver per watt of cell, median10mg/WTOPCon2025[2, 12]
Silver per watt of cell12mg/WHeterojunction2025[2]
Silver per watt of cell12.2mg/WBack contact2025[2]
Silver per cell90mg per cellTOPCon2025[12]
Module efficiency of this cell type, current (ITRPV results 2025)21.7%PERC2025[2]
Module efficiency of this cell type, current (ITRPV results 2025)23.5%TOPCon2025[2]
Module efficiency of this cell type, current (ITRPV results 2025)24.1%Back contact2025[2]
Silicon used per watt, all crystalline silicon cells2g/Wp– 2024[5]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specShareYearSource
PERCp-type wafer with a passivated rear; lowest silver use at 8.9 mg/W, being phased out142025About 14% of the market in 2025 [12]
TOPConn-type wafer with a tunnelling oxide and doped polysilicon layer; about 10 mg/W of silver752025About 75% of crystalline silicon cell production [4]
Heterojunctionn-type wafer with amorphous silicon layers on both faces; 12.0 mg/W of silver, copper contacts expected to replace silver52025About 5% of crystalline silicon cell production [4]
Back contactBoth contacts on the rear face; 12.2 mg/W of silver for the TOPCon-based type52025TOPCon-based back contact about 5% in 2025 [4]; 28% of the market expected in a decade [2]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Silver paste per watt on TOPCon cells (engineering: today's printed grid; ten-year ITRPV outlook)Engineering6.310mg/W[2]
Wafer thickness for PERC cells (engineering: p-type wafers will not be thinned below this)Engineering140140µm[12]
Efficiency of silicon-based tandem modules, outlook for 2028 (engineering)Engineering27.423.5% module efficiency[2]
Share of sunlight one silicon junction can convert; the band gap of silicon sets a ceiling (see the Solar photovoltaics page)Physical– 24.1% module efficiency, best series type[2]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on
  • Photovoltaic effect Light falling on the junction makes a current flow directly.
  • The p-n junction The junction's built-in field separates freed electrons from the gaps they leave.
Limited by
  • Band theory of solids Silicon's band gap fixes which light is used and how much is lost as heat, capping a single-junction cell.

as of 2026-11-13

Sources

  1. ITRPV 2026: Solar industry maintains historic learning curve despite market turbulence PV Tech, 2026
  2. ITRPV Expects TOPCon To Lead As BC And Tandem Technologies Expand TaiyangNews, 2026
  3. Photovoltaics Report Fraunhofer Institute for Solar Energy Systems ISE, 2026
  4. International Technology Roadmap for Photovoltaics (ITRPV): Results 2025, Seventeenth Edition VDMA Photovoltaics Equipment (copy hosted by QualEnergia.it), 2026