Vehicle transmission: Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Efficiency | Use | Fit more ratios (8-speed in place of 4-speed automatic) | 6.5 to 7.8% less fuel against a 4-speed automatic (agency projection) | Deployed | 8-speed transmissions were 33% of new US vehicles in model year 2024 | Car makers, transmission suppliers | [2][1] |
| Efficiency | Components design | Dual clutch in place of a torque-converter automatic with the same ratios | 4 to 6% better fuel consumption (projection) | Deployed | About 2% of the transmission market in 2015 (the paper uses US data) | Car makers | [2] |
| Electrify | Use | Battery electric car with a single reduction gear instead of a multi-speed gearbox | A reduction gear of 20.2 kg, 98% efficient, against 87.4 kg for the average conventional car's transmission and clutch in GREET (different studies) | Deployed | One quarter of new cars sold worldwide in 2025 were electric | Car makers, buyers, governments | [5][4][26] |
| Circularity | End of life | Remanufacture used gearboxes instead of making new ones | Global warming potential 36% lower than a new gearbox (case study) | Case study; adoption not found | Not found | Car makers, remanufacturers, workshops | [18] |
| Substitute | Supply chain | Low-carbon aluminium for casings | About a third of the emissions of conventional aluminium, at 5 to 10% higher cost (cited by the authors) | Available | Not found | Gearbox makers, aluminium suppliers | [33] |
| Design | Components design | Redesign a plug-in hybrid automatic to cut mass | 6.5 kg lighter than its predecessor (ZF 8HP Gen4 PHEV variant) | Deployed since 2022 | Not found | Transmission suppliers | [20] |
as of 2026-11-17
Sources
- The EPA Automotive Trends Report 2025: Fuel Economy and Technology since 1975 (EPA-420-R-26-001) U.S. Environmental Protection Agency, 2026, Section 4.B, pp. 76-80 and Table 4.1
- Transmissions (ICCT Working Paper 2016-17; Isenstadt, German, Burd and Greif) International Council on Clean Transportation, 2016
- Update of Vehicle Material Compositions in the GREET Model (Kelly and Winjobi) Argonne National Laboratory, 2020, Appendix Table A-1
- Life Cycle Assessment of a novel functionally integrated e-axle compared with powertrains for electric and conventional passenger cars (Koroma, Costa, Puricelli and Messagie, Science of the Total Environment 904, 166860) Elsevier, 2023, Tables 1, 3 and 4
- Remanufacturing in Circular Economy: A Gearbox Example, a Comparative Life Cycle and Cost Assessment (Gabhane and Kaddoura, Report 2017:7) Chalmers University of Technology, 2017
- Automatic Transmission: Fourth-Generation Efficiency (8HP Gen4) ZF Friedrichshafen AG, 2025
- Global EV Outlook 2026: Executive summary IEA, 2026
- Carbon footprint minimization of electric powertrains by multi-objective design optimization (Hofstetter, Lechleitner and Hirz, Forschung im Ingenieurwesen) Springer, 2025