Material Insights · Understanding the Material World

Vehicle transmission: Footprint

Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

VariantMaterialAmount (kg)Emission factor (kg CO2e per kg)Emissions (kg CO2e)
ManualSteel57.991.92111.3
ManualAluminium24.3814.8360.8
ManualCopper1.443.9655.7
AutomaticSteel57.991.92111.3
AutomaticAluminium24.3814.8360.8
AutomaticCopper1.443.9655.7

Worked out from data

The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

VariantStagePlaceEmissions (kg CO2e)Mass covered by factors
ManualMakingWorld478100%
ManualUseWorld– –
ManualMakingIndia478100%
ManualUseIndia– –
AutomaticMakingWorld478100%
AutomaticUseWorld– –
AutomaticMakingIndia478100%
AutomaticUseIndia– –

Worked out from data

Energy to make it

Energy used to make one unit, by carrier and stage

Energy to make
  • El Electricity 15.5 kWh · Manufacturing Battery electric (single-speed) Electricity to manufacture the 20.2 kg transmission of the FITGEN e-axle (Table 4) [5]. Materials stage not given.
  • Ht Heat 164 MJ · Manufacturing Battery electric (single-speed) Heat to manufacture the same transmission (Table 4) [5].

as of 2026-11-17

End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

RouteSharePlaceYearSource
Obligation under the ELV Rules met at registered scrapping centres (about 2.4 of 7.62 lakh vehicles required, calculated from a 5.2 lakh shortfall); a share of vehicles required, not of all end-of-life vehicles32India2026[28]

as of 2026-11-17

Recovered as

The commodities and chemicals recovered at end of life, with recovery rates

Recovered as
  • St Steel Shredding and recycling of vehicle scrap Gears, shafts and bearings are steel; no rate for transmissions found.
  • Al Aluminium Recycling of cast aluminium casings Casings are cast aluminium (19.88 kg, calculated) [4]; no rate for transmissions found.
  • Cu Copper Recycling of small copper parts About 1.44 kg of copper per gearbox (calculated) [4].

as of 2026-11-17

End of life in India

Collection and recycling in India, including the informal sector

India's End-of-Life Vehicle Rules oblige makers to scrap at least 8% of the steel equivalent of vehicles sold about 20 years earlier, but about 70% of the FY26 target was missed [28]. The source warns that informal dismantling and untracked vehicle flows could undermine recovery [28]. A Chalmers case study of a 95 kg six-speed automatic used in Volvo cars found remanufacturing cut global warming potential by 36% against a new unit [18].

as of 2026-11-17

Sources

  1. Update of Vehicle Material Compositions in the GREET Model (Kelly and Winjobi) Argonne National Laboratory, 2020, Appendix Table A-1
  2. Life Cycle Assessment of a novel functionally integrated e-axle compared with powertrains for electric and conventional passenger cars (Koroma, Costa, Puricelli and Messagie, Science of the Total Environment 904, 166860) Elsevier, 2023, Tables 1, 3 and 4
  3. Remanufacturing in Circular Economy: A Gearbox Example, a Comparative Life Cycle and Cost Assessment (Gabhane and Kaddoura, Report 2017:7) Chalmers University of Technology, 2017
  4. India's ELV Rules Leave Auto Sector 70% Short Of FY26 Scrappage Target Auto Recycling World, 2026