Vehicle wiring harness: Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Substitute | Components design | Use aluminium instead of copper for conductors | Could cut harness weight by about 10 to 20% [2] (10 to 15% in TE Connectivity's own 2013 estimate [11]); but an Indian life cycle study found aluminium harnesses emit more than copper ones at manufacture [16], and a 2008 study found the fuel saved in use was cancelled by the higher impact of production [15] | Deployed in a small share: about 5.0% of automotive wiring in 2018 | 5.0% of wiring in 2018; 7.5% forecast for 2023 [2] | Harness makers, carmakers | [2][11][15][16] |
| Circularity | Making | Use recycled copper in conductors | Aptiv says its recycled copper saves about 72%, or 17 kg CO2e, per typical high-voltage harness [17]; an Indian study finds 17% lower harness emissions by 2032 with recycled copper and more renewable power [16] | Piloted: Aptiv's recycled copper passed validation tests in 2022 [34] | Not found | Harness makers, wire suppliers, carmakers | [16][17][34] |
| Design | Components design | Redesign the harness to be lighter and simpler, for example with zonal layouts | Aptiv says its Smart Vehicle Architecture cuts harness weight by more than 25% [34] | Deployed at some makers | Not found | Carmakers, harness makers | [34] |
| Use less | Components design | Use flat flexible cable with less copper in place of round wire | Assessed for an engine harness as an alternative with less copper; no saving figure is in the abstract [14] | Research | Not found | Harness makers | [14] |
| Efficiency | Use | Cut vehicle mass by lightening the harness | A 10% cut in vehicle weight can improve fuel economy by 6 to 8% [18]; a harness is a small part of a car's weight, so the saving per harness is small | Deployed | Not found | Carmakers | [18] |
| Change route | Making | Automate more of harness assembly | Automation is no more than about 10% in large parts of harness making and about 90% in one Audi demonstrator [19]; no emissions effect is given | Piloted | No more than about 10% [19] | Harness makers, carmakers | [19] |
| Circularity | End of life | Remove the main harness before shredding the car | Removing about half of the main harness, together with electric motors in battery electric cars, could cut copper in steel scrap from about 0.4% to about 0.2% [12] | Proposed in a study for EU rules | Not found | Recyclers, regulators | [12] |
as of 2026-11-15
Sources
- What lies ahead for the automotive harness industry? (white paper, Wire and Cable Conference 2019) CRU Group, 2019
- TE Connectivity Driving Weight Out of Vehicle Connectors Wards Auto (Byron Pope), 2013
- Setting recycled-content targets for steel under the ELV Regulation (briefing) Transport and Environment, 2025
- Electrical and electronic components in the automotive sector: Economic and environmental assessment The International Journal of Life Cycle Assessment 12(5) (Dose, Alonso, Fleischer and others), 2007
- Sustainable Electrical and Electronic System for the Automotive Sector: SEES (FISITA2008/F2008-09-005) FISITA, 2008
- Life Cycle Assessment of Automotive Cables and GHG Emission Reduction Scenario in Indian Context (SAE 2026-26-0240) SAE International, via TRID (Kumar, Bawase and Thipse), 2026
- Recycled Copper Could Help OEMs Meet Sustainability Goals Aptiv, 2022
- Lightweight Materials for Cars and Trucks US Department of Energy, Vehicle Technologies Office
- How the harness is being reinvented Automotive Manufacturing Solutions (Timo Gilgen), 2026
- Sustainability in Motion: 2023 Sustainability Summary Report Aptiv, 2023